研究生教學網
Master of Science (M.S.) Program offered in School of Mechanical Engineering
To obtain a Master of Science (MS) Degree from School of Mechanical Engineering (ME), students must fulfill the following requirements.
1. Complete specific Coursework.
2. Preparation, propose, and defend a Master Thesis.
3. No requirement for paper publication.
4. The length of MS program is 2.5 years. If the thesis isn’t completed within 2.5 years, the student could apply for extension. The maximum length is 3.5 years.
1.Coursework
To complete their coursework requirement, Master students must take a number of courses, while maintaining a minimum Grade Point Average (GPA). Courses offered in English in ME are divided into two categories, GPA course and Non-GPA course (refer to Fig.2). GPA courses will be calculated into GPA.
1) Credits requirement.
①At least 30 credits’ courses must be completed.
②Among the 30 credits, at least 19 credits must be obtained from GPA courses.
③ Compulsory courses are: Chinese Language (2 credits), Chinese Culture (2 credits), English for Academic Purposes (2 credits) and two mathematics courses (6 credits). All of these five courses belong to GPA courses.
2) Minimum GPA requirement.
①Students whose GPA for GPA courses below 2.7 are not eligible for thesis defense.
② Students who failed in exam are not eligible for thesis defense. Students who retake the corresponding course and get exam passed will be eligible for thesis defense.
2.Master Thesis
Candidates who have completed all the requirements of Coursework are eligible for master thesis defense. The length of the thesis should be around 20,000 words in English. A successful defense of a Master Thesis involves the following steps, which are shown in Fig. 3.
Figure 1. Overview of M.S. Program | ||
Timeline | Event | Note |
The first two weeks of Semester 1 | Make your study plan online according to the Degree Requirements, select courses online and take courses | All the online application process should be operated in the Graduate Information Management System with your SJTU Jaccount. (http://yjs.sjtu.edu.cn/) |
The first month of Semester 1 | Submit the hard copy of your study plan to the Graduate Affairs Office(Room 102, Mechanical Building A) | Signature of your supervisor is required before submission the hard copy to Graduate Affairs Office |
Semester 2 | Select courses online, complete all the coursework in your study plan and prepare for the thesis proposal. | In principle study plan shall not be changed. If changes needed, the request can only be accepted within the first beginning two weeks while the certain courses you’d like to change haven’t got started. |
Semester 3, 4 and 5 | Prepare, propose, and defend a Master Thesis according to the Degree Requirements | In principle M.S. Program shall be finished within 2.5-3.5 years. If extension needed, please go to Graduate Affairs Office for details.
|
| Figure 2: Courses offered in English at ME for 2017-2018 Academic Year (2017-2018學年機械動力學院全英文課程開設情況及分類) | ||||||
| No. | Course Code | 課程名稱（中文） | Course Name | Credit | Category | Semeser |
| 1 | EP26003 | 高等工程熱力學（英文） | Advance Engineering Thermodynamics | 3 | GPA Course | Spring&Fall |
| 2 | EP26004 | 高等傳熱學（英文） | Advanced Heat Transfer | 3 | GPA Course | Fall |
| 3 | EP26001 | 高等工程流體力學（英文） | Advanced Fluid Dynamics in Engineering | 3 | GPA Course | Fall |
| 4 | ME26005 | 數字信號處理（英文） | Digital Signal Processing | 3 | GPA Course | Fall |
| 5 | ME26021 | 計算機圖形學（英文班） | Computer Graphics | 3 | GPA Course | Fall |
| 6 | ME26018 | 彈塑性力學 | Elastic & Plastic Mechanics | 3 | GPA Course | Fall |
| 7 | EP26002 | 計算流體力學（英文） | Computational Fluid Dynamics | 3 | GPA Course | Fall |
| 8 | ME6029 | 高等運籌學（英文） | Advanced Operations | 3 | GPA Course | Fall |
| 9 | ME6033 | 生產與運作分析（英文） | Production and Operation Analysis | 3 | GPA Course | Fall |
| 10 | ME6019 | 汽車系統動力學（英文） | Software Engineering for Automotive Electronic Control System | 3 | Non-GPA Course | Fall |
| 11 | ME26016 | 博弈論 | Game Theory | 3 | Non-GPA Course | Fall |
| 12 | PO6017 | 循環流化床燃燒技術（英文） | Circulating Fluidized Bed Combustion | 3 | Non-GPA Course | Fall |
| 13 | PO6020 | 新能源系統（英文） | New Energy Systems | 3 | Non-GPA Course | Fall |
| 14 | EP26009 | 先進空氣動力學測量技術基礎與實踐 | Fundamentals and Practices of Advanced Aerodynamics Measurement Technologies | 3 | Non-GPA Course | Fall |
| 15 | ME7007 | 工廠物理學（英文班） | Factory Physics | 3 | Non-GPA Course | Fall |
| 16 | ME26001 | 測試原理、傳感器與系統（英文） | Basic Principle, Sensors and Systems for Mechanical Measurement | 3 | GPA Course | Spring |
| 17 | EP26013 | 高等燃燒學（英文班） | Advanced Combustion Theory | 3 | GPA Course | Spring |
| 18 | PO6002 | 燃燒化學動力學（英文） | Combustion Chemical Kinetics | 3 | GPA Course | Spring |
| 19 | PO6011 | 多相流與傳熱（英文） | Multiphase Flow and Heat Transfer | 3 | GPA Course | Spring |
| 20 | PO6013 | 微尺度流動與傳熱（英文） | Microfluid Flow and Heat Transfer | 3 | GPA Course | Spring |
| 21 | ME26003 | 摩擦學與潤滑理論（英文） | Tribology & Lubrication Theory | 3 | GPA Course | Spring |
| 22 | ME6031 | 數據挖掘（英文） | Data Mining | 3 | GPA Course | Spring |
| 23 | ME6035 | 離散事件導論（英文） | Introduction to Discrete Event System | 3 | GPA Course | Spring |
| 24 | ME6001 | 結構聲學（英文） | Structural Acoustics | 3 | Non-GPA Course | Spring |
| 25 | ME6041 | 現代汽車動力總成技術（英文） | Advanced Powertrain Technologies | 3 | Non-GPA Course | Spring |
| 26 | ME7004 | 汽車控制工程（英文） | Modern Vehicle Control Engineering | 3 | Non-GPA Course | Spring |
| 27 | ME26022 | 機器視覺與應用（英文班） | Machine Vision and its Applications | 3 | Non-GPA Course | Spring |
| 28 | ME26023 | 微細制造（英文班） | Micro Manufacturing | 3 | Non-GPA Course | Spring |
| 29 | ME7008 | 算法設計與分析 | Algorithm Design and Analysis | 3 | Non-GPA Course | Spring |
Figure 3. Master Thesis Timeline | ||
Notes: All the online application process should be operated in the Graduate Information Management System with your SJTU Jaccount. | ||
To-do List | Deadline | Description |
Step 1. Upload Thesis Proposal Form online and submit the hard copy to Graduate Affairs Office. | The end of semester 3 | Work with your supervisor on the thesis proposal. Thesis proposal provides the following information: (1) the proposed content of the research work, (2) a comprehensive literature review of the state-of-the-art in the field, (3) a description of the research tasks that have been completed, (4) a discussion of preliminary results, (5) the original contribution of the proposed research, and (6) the tasks that will be completed before the thesis defense. |
Step 2.Upload draft thesis online for repetition check and blind-evaluation | a month before the end of semester 5 | Candidates will get repetition-check result before the deadline. Candidates with repetition-check rate over 10% will not be eligible to apply for MS degree. The draft thesis uploaded is the one to be evaluated in blind-evaluation process. |
Step 3.Get informed of blind-evaluation and submits hard copy of draft thesis to Graduate School. | a week before the end of semester 5 | (1)Candidates’ draft thesis will be selected randomly for blind evaluation. The result of blind-evaluation only serves as reference suggestions to final thesis defense result. |
Step 4.Check the feedback of draft thesis evaluation | a week before the thesis defense | Candidates’ draft thesis will be evaluated by two experts. Candidates can check the feedback of evaluation before the deadline. |
Step 5. Apply for thesis defense online
| 3 days before thesis defense | |
Step 6. Defense for thesis | The end of semester 5 | Thesis defense lasts for 40 minutes, including 20-30 minutes presentation of thesis content and 10-20 minutes answering questions given by Master Thesis Committee (MTC). |
Step 7.Submit final thesis online | 3 days after thesis defense | Candidates revise draft thesis according to MTC’s comments. Final thesis and other related documents will be submitted to Academic Degree Committee for final evaluation. |
Step 8. Being awarded M.S degree | Determined by Academic Degree Committee | Hard copy of M.S degree will be awarded to successful candidates. |
地址：上海市閔行區東川路800號
上海交通大學 機械與動力工程學院A樓102室
郵編：200240