Sept. 2010-Mar. 2017 Shanghai Jiao Tong University, Mechanical Engineering, Doctor
Aug. 2015-Aug. 2016 Georgia Institute of Technology, Mechanical Engineering, Student intern
Sept. 2006-Jun. 2010 Wuhan University, Mechanical Engineering, Bachelor

Jun. 2020-Present Shanghai Jiao Tong University, Associate Professor
Jan. 2019-Feb. 2020 TU Dortmund, Humboldt scholar
Apr. 2017-May. 2020 Wuhan University, Postdoctoral

*On-machine measurement for 5-axis machine tool
*Closed-loop control of machining accuracy by integrating the machining and measuring
*Identification and compensation of geometric errors of 5-axis machine tools

*Feb. 2020-Dec. 2021 Shanghai Aerospace Science and Technology Innovation Fundation. “Multi-axis machining process optimization based on efficient 3D on-machine measurement”
*Jul. 2019-May. 2020 Postdoctoral Science Special Foundation. “Identification, estimation and compensation of machining deformation of thin-walled part based on 3D on-machine measurement”
*Jan. 2019-Dec. 2020 Open Research Fundation of State Key Laboratory of Digital Manufacturing and Equipment Technology, HUST. “Multi-axis machining of complex aerospace parts with deep cavity with high efficiency based on tool protection”
*Jan. 2019-Dec. 2020 Open Research Fundation of State Key Laboratory of High Performance Complex Manufacturing, Central South University. “Research on mechanism and process of efficient plunge milling of aerospace typical difficult machining parts with shaped deep cavity”
*Jan. 2018-May. 2020 China Postdoctoral Science Foundation.” Mechanism and process planning of plunge milling of deep cavity structure”
*Jan. 2018-Dec. 2020 National Natural Science Foundation of China. “Research on contact-type on-machine measurement oriented machining accuracy inspection methodology for complex surface”

[1] Huang N*, Krebs E, Baumann J, Zhou Y, Wu S, Biermann D. Experimental investigation on influence of engagement angle and tool geometry on plunge milling[J]. The International Journal of Advanced Manufacturing Technology, 2020, https://doi.org/10.1007/s00170-020-05480-x.
[2] Huang N*, Krebs E, Baumann J, Wirtz A, Jaeger M E, Biermann D. A universal pocket plunge milling method to decrease the maximum engagement angle[J]. Journal of Manufacturing Science and Engineering, 2020, 142(8): 081005 .
[3] Huang N, Jin Y, Lu Y, Yi B, Li X, Wu S*. Spiral toolpath generation method for pocket machining[J]. Computers & Industrial Engineering, 2020, 139: 106142.
[4] Yu L, Bi Q, Ji Y, Fan Y, Huang N, Wang Y*. Vision based in-process inspection for countersink in automated drilling and riveting[J]. Precision Engineering, 2019, 58: 35-46.
[5] Huang N, Jin Y, Li X, Liang L, Wu S*. Identification of integrated geometric errors of rotary axis and setup position errors for 5-axis machine tools based on machining test[J]. The International Journal of Advanced Manufacturing Technology, 2019, 102(5-8): 1487-1496.
[6] Huang N, Jin Y, Lu Y, Li X, Wu S*. Plunge milling with constant scallop height by adaptively modifying the step interval for pocket wall[J]. The International Journal of Advanced Manufacturing Technology, 2019, 101(1-4): 203-208.
[7] Bi Q*, Huang N, Zhang S, Shuai C, Wang Y. Adaptive machining for curved contour on deformed large skin based on on-machine measurement and isometric mapping[J]. International Journal of Machine Tools and Manufacture, 2019, 136: 34-44.
[8] Zhong L, Bi Q, Huang N, Wang Y*. Dynamic accuracy evaluation for five-axis machine tools using S trajectory deviation based on R-test measurement[J]. International Journal of Machine Tools and Manufacture, 2018, 125: 20-33.
[9] Huang N, Yin C, Liang L, Hu J, Wu S*. Error compensation for machining of large thin-walled part with sculptured surface based on on-machine measurement[J]. The International Journal of Advanced Manufacturing Technology, 2018, 96(9-12): 4345-4352.
[10] Lynn R*, Dinar M, Huang N, Collins J, Yu J, Greer C, Tucker T, Kurfess T. Direct Digital Subtractive Manufacturing of a Functional Assembly Using Voxel-Based Models[J]. Journal of Manufacturing Science and Engineering, 2018, 140(2): 021006.
[11] Zhang Y, Bi Q, Huang N, Yu L, Wang Y*. On-line non-destructive measurement for interference-fit riveting based on force-deformation data analysis[R]. SAE Technical Paper, 2017.
[12] Huang N, Lynn R, Kurfess T*. Aggressive Spiral Toolpaths for Pocket Machining Based on Medial Axis Transformation[J]. Journal of Manufacturing Science and Engineering, 2017, 139(5): 051011.
[13] Lynn R*, Contis D, Hossain M, Huang N, Tucker T, Kurfess T. Voxel model surface offsetting for computer-aided manufacturing using virtualized high-performance computing[J]. Journal of Manufacturing Systems, 2017, 43: 296-304.
[14] Lynn R, Contis D, Hossain M, Huang, N, Tucker T, Kurfess T*. Extending access to HPC manufacturability feedback software through hardware-accelerated virtualized workstations[C]//Flexible Automation (ISFA), International Symposium on. IEEE, 2016: 271-277.
[15] Huang N*, Zhang S, Bi Q, Wang Y. Identification of geometric errors of rotary axes on 5-axis machine tools by on-machine measurement[J]. The International Journal of Advanced Manufacturing Technology, 2016, 84(1-4): 505-512.
[16] Huang N, Bi Q, Wang Y*. Identification of two different geometric error definitions for the rotary axis of the 5-axis machine tools[J]. International Journal of Machine Tools and Manufacture, 2015, 91: 109-114.
[17] Bi Q, Huang N, Sun C, Wang Y*, Zhu L, Ding H. Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement[J]. International Journal of Machine Tools and Manufacture, 2015, 89: 182-191.
[18] Huang N, Jin Y, Bi Q*, Wang Y. Integrated post-processor for 5-axis machine tools with geometric errors compensation[J]. International Journal of Machine Tools and Manufacture, 2015, 94: 65-73.
[19] Sun C, Wang Y H*, Huang N D. A new plunge milling tool path generation method for radial depth control using medial axis transform[J]. The International Journal of Advanced Manufacturing Technology, 2015, 76(9-12): 1575-1582.
[20] Sun C, Bi Q, Wang Y*, Huang N. Improving cutter life and cutting efficiency of five-axis plunge milling by simulation and tool path regeneration[J]. The International Journal of Advanced Manufacturing Technology, 2015, 77(5-8): 965-972.
[21] 崔鑫*, 鄭驥, 黃諾帝, 畢慶貞. 大型曲面薄壁工件自動補償銑削技術研究[J]. 制造技術與機床, 2015 (2): 91-93.
[22] Huang N, Bi Q, Wang Y*, Sun C. 5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement[J]. International Journal of Machine Tools and Manufacture, 2014, 84: 1-8.

*An efficient spiral toolpath planning method for pocket based on Medial axis transformation. Application No. 201810099154.9
*House of quality for federated manufacturing APPs. US Patent No. US2017/053974

*Jul. 2018 Humboldt Research Fellowship for Postdoctoral Researchers
*Mar. 2017 Honorable mentioned excellent doctor degree dissertation, SJTU