2003-2008, Ph.D. Mechanical Engineering Shanghai Jiao Tong University, Doctor
1999-2003, B.S. in Mechanical Engineering Nanjing University of Science & Technology, Bachelor

2008-2010: Postdoctoral, School of Mechanical Engineering, Shanghai Jiao Tong University
2010-2012: Assistant Professor , School of Mechanical Engineering, Shanghai Jiao Tong University
2013- Associate Professor, School of Mechanical Engineering, Shanghai Jiao Tong University
2015- Vice Chair, Department of Mechanical Engineering, Shanghai Jiao Tong University
2020- Professor, School of Mechanical Engineering, Shanghai Jiao Tong University

2011-2012： Postdoctoral, Wright State University, USA,

laser peening;
Microscale 3D Laser printing (Laser-induced forward transfer)；
Laser-induced particle impact test

2016-2019 Shanghai Rising-Star Program "Double-side laser peening of thin-walled structure for residual stress and deflection control",Project Principal
2015-2017 Aeronautic science foundation "laser peening of thin-walled structure",Project Principal
2014-2017 National Natural Science Foundation of China"Laser thermal assisted laser peen forming to bending titanium alloy sheet",Project Principal.
2010-2012 National Natural Science Foundation of China "Size effects in the high-strain-rate dynamic bending of thin sheet metal by laser peen forming",Project Principal.
2009-2010 Key Project of China Postdoctoral Science Foundation "The mechanism of laser peen forming for bending thin sheet metal: numerical simulation and experiments,Project Principal.
2008-2009 China Postdoctoral Science Foundation "Direct fabrication of periodical micro-structure on silicon by nanosecond laser interference lithography", Project Principal.

2022
1. Guohu Luo, Di Wu, Yu Zhou, Yongxiang Hu*, Zhenqiang Yao, Laser printing of large-scale metal micro/nanoparticle array: Deposition behavior and microstructure. International Journal of Machine Tools and Manufacture, 2022, 173: 103845.
2. YifeiPenga，GuohuLuo, YongxiangHu*, Ding-Bang Xiong*, Extreme strain rate deformation of nacre-inspired graphene/copper nanocomposites under laser-induced hypersonic micro-projectile impact. Composites Part B: Engineering, 2022, 235(15): 109763

2021
1. Maziar Toursangsaraki, Quan Li, Yongxiang Hu*, Huamiao Wang, Duo Zhao, Yaobang Zhao. Crystal plasticity modeling for mechanical property prediction of AA2195-T6 friction stir welded joints. Materials Science & Engineering A , 2021, 823:141677
2. Maziar Toursangsaraki, Huamiao Wang, Yongxiang Hu*, Dhandapanik Karthik, Crystal Plasticity Modeling of Laser Peening Effects on Tensile and High Cycle Fatigue Properties of 2024-T351 Aluminum Alloy[J]. Journal of Manufacturing Science and Engineering, ASME Transactions, 2021, 143(7): 071015.
3. Dhandapanik Karthik, Jiancheng Jiang, Yongxiang Hu*, Zhenqiang Yao, Effect of multiple laser shock peening on microstructure, crystallographic texture and pitting corrosion of Aluminum-Lithium alloy 2060-T8. Surface and Coatings Technology, 2021: 127354.
4. Yu Zhou, Guohu Luo, Yongxiang Hu*, Di Wu, Zhenqiang Yao, Interaction properties between molten metal and quartz by molecular dynamics simulation. Journal of Molecular Liquids, 2021, 342: 117474.
5. Jiancheng Jiang, Yongxiang Hu*, Maziar Toursangsaraki, Improvement of numerical instabilities in process planning of laser peen forming based on perimeter constraint, Advanced Laser Processing and Manufacturing V. SPIE, 2021, 11892: 35-49.
6. Maziar Toursangsaraki, Yongxiang Hu*, Jiancheng Jiang, Experimental investigation of laser peening effects on tensile properties of AA2195-T6 friction stir welded joints, Advanced Laser Processing and Manufacturing V. SPIE, 2021, 11892: 26-34.

2020
1. Mingsheng Luo, Yongxiang Hu*, L. Hu, Z. Yao. Efficient process planning of laser peen forming for complex shaping with distributed eigen-moment. Journal of Materials Processing Technology, 2020, 279: 116588.
2. Yongxiang Hu*, Hai Cheng, Jianhua Yu, Zhenqiang Yao, An experimental study on crack closure induced by laser peening in pre-cracked aluminum alloy 2024-T351 and fatigue life extension, International Journal of Fatigue, 2020, 130: 105232
3. D. Karthik, Y. Hu, Z. Yao. Grain orientation and crystallographic texture governed gradient oxidation in laser peening. Materials Letters, 2020, 268: 127630.

2019
1. Yongxiang Hu*, Yufei Xie, Di Wu, Zhenqiang Yao Quantitative evaluation of specimen geometry effect on bending deformation of laser peen forming. International Journal of Mechanical Sciences, 2019, 150: 404-410.
2. Ruoyu Yang, Yongxiang Hu*, Mingsheng Luo, Han Cheng, Zhenqiang Yao, Distortion control of thin sections by single-sided laser peening, Optics and Lasers in Engineering, 115 (2019) 90-99.
3. Yongxiang Hu*, Mengqi Lai, Zonghao Hu, Zhenqiang Yao, Effect of multiple laser peening on surface integrity and microstructure of laser additive manufactured Ti6Al4V titanium alloy, Rapid Prototyping Journal
4. Jie Zhao, Yongxiang Hu*, Surface morphology formation of Ti films in laser-induced forward transfer, Surface Topography-Metrology and Properties, 2019, 7(2): 025022
5. Y.X. Hu*, Y. Song, Y. Li, Z.Q. Yao, An analytical model to predict interfacial burr height for metal stack drilling, Proc. Inst. Mech. Eng. Part B-J. Eng. Manuf., 2019: 233(1): 99-108.

2018
1. Yongxiang Hu, Ruoyu Yang, Dongyu Wang, Zhenqiang Yao. Geometry distortion and residual stress of alternate double-sided laser peening of thin section component. Journal of Materials Processing Technology, 2018, 251: 197-204.

2017
1. Zhengyu Zhang, Yongxiang Hu, Zhenqiang Yao. Shape Prediction for Laser Peen Forming of Fiber Metal Laminates by Experimentally Determined Eigenstrain. Journal of Manufacturing Science and Engineering, 2017, 139(4): 041004.
2. Yongxiang Hu, Han Cheng, Jiaxi Xu and Zhenqiang Yao. A coupling model to simulate the dynamic process of blister-actuated nanosecond laser-induced forward transfer. Journal of Physics D: Applied Physics, 2017, 50(32): 325305.

2016
Hu, Y., Luo, M., and Yao, Z., Increasing the Capability of Laser Peen Forming to Bend Titanium Alloy Sheets with Laser-Assisted Local Heating, Materials & Design, 2016， 90: 364-372.
2015
1. Y. Hu, X. Zheng, D. Wang, et al. Application of laser peen forming to bend fibre metal laminates by high dynamic loading. Journal of Materials Processing Technology, 2015, 226: 32-39.
2. Y. Hu, Z. Li, X. Yu, et al. Effect of elastic prestress on the laser peen forming of aluminum alloy 2024-T351: Experiments and eigenstrain-based modeling. Journal of Materials Processing Technology, 2015, 221(0): 214-224.
2014
1.Hu, Y.X, Li, Z., Li, K.M, Yao, Z.Q. Predictive Modeling and Uncertainty Quantification of Laser Shock Processing by Bayesian Gaussian Processes With Multiple Outputs. Journal of Manufacturing Science and Engineering, 2014. 136(4), 041014.
2. K. Li, Z. Yao, Y. Hu, et al. Friction and wear performance of laser peen textured surface under starved lubrication. Tribology International, 2014, 77(0): 97-105.
2013
2.A. Vasu, Y.X Hu, R.V. Grandhi, Differences in plasticity due to curvature in laser peened components, Surface and Coatings Technology, 235 (2013) 648-656.
3.K.M. Li., Y.X. Hu, Z.Q. Yao. Experimental study of micro dimple fabrication based on laser shock processing. Optics & Laser Technology, 2013, 48: 216-225.
4.姚振強, 胡永祥. 基于短脈沖激光束干涉的硅表面亞微米結構加工工藝. 機械工程學報， 2013, 49(6): 122-128

2012
1.Y.X. Hu, R.V. Grandhi. Efficient numerical prediction of residual stress and deformation for large-scale laser shock processing using the eigenstrain methodology. Surface and Coatings Technology, 2012, 206(15): 3374-3385.
2.Yongxiang Hu, Kangmei Li, Chenjie Qi, Zhenqiang Yao, Ramana V. Grandhi. Size effect on indentation depth of oxygen-free high purity copper induced by laser shock processing. Transactions of Nonferrous Metals Society of China 22(2012) s573?s578
2011
1. Y.X Hu, Z. Yao, X. Xu. Experimental Investigation on the Bending Deformation of thin 1060 Pure Aluminum Sheet by Laser Peen Forming. In: Champaigne J, ed, The 11th International Conference on Shot Peening, South Bend, Indiana, USA, 2011: 341-346
2010
1.Yongxiang Hu, Xiaoxia Xu, Zhenqiang Yao, and Jun Hu. Laser peen forming induced two way bending of thin sheet metals and its mechanisms. Journal of Applied Physics, 2010, 108(7): 073117.1-073117.7
2.Yongxiang Hu, Yefei Han, Zhenqiang Yao, and Jun Hu. Three-Dimensional Numerical Simulation and Experimental Study of Sheet Metal Bending by Laser Peen Forming. Transactions of ASME, Journal of Manufacturing Science and Engineering, 2010, 132(6): 061001.1-061001.10

ME1221, Introduction to Engineering, 4 credits
ME6124, Elastic and Plastic Mechanics, 3 credits

ASME Member;

2016 Shanghai Rising-Star Program