1997-2000, Jilin University of Technology, Doctor
1994-1997, Jilin University of Technology, Master
1990-1994, Jilin University of Technology, Bachelor

2009—present, Professor, School of Mechanical Engineering, Shanghai Jiao Tong University
2002—2008, Associate Professor, School of Mechanical Engineering, Shanghai Jiao Tong University
2000—2002, Postdoctor,Department of Plastic Forming, Shanghai Jiao Tong University

2007.10-2008.3 University of Michingan, Ford Research and Innovation Center, Visiting
2014.12-2015.10 The Ohio State University, Visiting

Elasto-plastic Finite element method.
CAD/CAE techniques in mechanical design and forming process.
Plastic forming theory and simulation technology

1．2005-2007, National Natural Science Foundation of China, “Large deformation mechanism and process simulation of the magnesium sheet”.
2．2008-2010, Project of MOE,"Multi-scale study on the deformation mechanism and formability of magnesium sheet”.
3．2009-2011, Shanghai Key Basic Research Foundation “Cage-roll forming theory and process design methodology of ERW pipes.
4．2006-2008, Sub-program of Shanghai Key Industry Project ,“Dynamic deformation theory and application of advanced high strength steel.
5．2006-2008, Shanghai International Cooperation Project “Roll design and process optimization of roll forming based on the whole-process simulation.
6．Project from Bao steel company ,“process optimization of roll forming of ERW pipes. 2005.2～2007.2.
7．2009-2011, University Research Project (URP) of Ford Motor Company“Integrated Computational Materials Engineering (ICME) Methodology Development for Alloy Design & Defects Control for Al & Mg Forming-stage II”.
8．2006-2013,Project from Daikin Industries Co. Ltd., "Research on Plastic Forming of Heat Exchangers".
9. 2012-2013，Project from Baosteel,"FE simulation system development for UOE forming".
10. 2009-2011,URP project from Ford Motor Company,"Integrated Computational Materials Engineering (ICME) Methodology Development for Alloy Design & Defects Control for Al & Mg Forming-Stage II".
11. 2012-2015, NSFC project,"Forming limit prediction of magnesium alloy sheets based on crystalline plasticity models".
12. 2013-2015，URP project from Ford Motor Company,"Life Assessment of Spot Welds based on Crack Propagation".
13. 2017-2020, NSFC project "Integrated modeling of polycrystal plasticity and dynamic recrystalization for hot forming of magnesium alloys".

1. Dayong Li, Robert H. Wagoner, The Nature of Yielding and Anelasticity in Metals. Acta Materialia. 2021, 116625. https://doi.org/10.1016/j.actamat.2021.116625
2. Guanghan Wu, Dayong Li? , Wei-Jen Lai, Yandong Shi, Hongtae Kang, Yinghong Peng, Xuming Su. Fatigue behaviors and mechanism-based life evaluation on SPR-bonded aluminum joint. International Journal of Fatigue 142 (2021) 105948.
3. Zihan Li, Guowei Zhou, Dayong Li*, Mukesh K.Jain, Yinghong Peng, Peidong Wu. Forming limits of magnesium alloy AZ31B sheet at elevated temperatures. International Journal of Plasticity, 2020, 135: 102822. https://doi.org/10.1016/j.ijplas.2020.102822
4. Guowei Zhou, Qingping Sun, Dayong Li, Zhaoxu Men, YinghongPeng, DanielleZeng, XumingSu. Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states. Polymer Testing, 2020, 90, 106657. https://doi.org/10.1016/j.polymertesting.2020.106657.
5. Guanghan Wu, Dayong Li*, Wei‐Jen Lai， Qiuren Chen，Yandong Shi，Li Huang， Shiyao Huang, Hongtae Kang, Yinghong Peng, Xuming Su. Experimental and numerical evaluations on the effects of adhesive fillet, overlap length and unbonded area in adhesive‐bonded joints. Fatigue & Fracture of Engineering Materials & Structures. 2020, https://doi.org/10.1111/ffe.13294
6. Weiqin Tang, Guowei Zhou, Yichuan Shao, Dayong Li*, Yinghong Peng, Huamiao Wang. On the role of yttrium in microstructure evolution and texture modification during magnesium alloy extrusion. Materials Characterization, 2020, 162, 110189.
7. S.F. Chen, D.Y. Li, S.H. Zhang, H.N. Han, H.W. Lee, M.G. Lee. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach. International Journal of Plasticity, 2020,141, 102710.
8. Guowei Zhou, Qingping Sun, Joel Fenner, Dayong Li*, Danielle Zeng, Xuming Su, Yinghong Peng. Crushing behaviors of unidirectional carbon fiber reinforced plastic composites under dynamic bending and axial crushing loading. International Journal of Impact Engineering, 2020, 140, 103539
9. Zhiheng Zhang, Zhenye Liang, Dayong Li*, Shichao Ding. Clamp forming of local features on sheet metals. Journal of Materials Processing Technology, 2020, 275, 116331.
10. Kai Li, Tianxia Zou, Dayong Li*, Yinghong Peng, Da Shu. On formation of abnormally large grains in annealing pre-strained aluminum alloy multi-port extrusion tubes. Metallurgical and Materials Transactions A, 2019, 50: 5734–5749.
11. Tao Tang, Guowei Zhou, ZihanLi, Dayong Li*, Liming Peng, Yinghong Peng, Peidong Wu, Huamiao Wang, Myoung-Gyu Lee. A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys. International Journal of Plasticity, 2019, 116(5): 159-191.
12. Yangguang Li, Zhenye Liang, Zhiheng Zhang, Tianxia Zou, Dayong Li*, Shichao Ding, Hua Xiao, Lei Shi. An Analytical Model for Rapid Prediction and Compensation of Springback for Chain-die Forming of an AHSS U-channel. International Journal of Mechanical Sciences, 2019, 159: 195-212.
13. Kai Li, Dayong Li, Tianxia Zou, Da Shu, Ding Tang, and Yinghong Peng. Strength Variation in Processing Multiport Extrusion Tubes of A1100 and A3102 Alloys. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-019-04132-w.
14. Weiye Chen, Jinmao Jiang, Dayong Li*, Tianxia Zou, Yinghong Peng. Flower pattern and roll positioning design for the cage roll forming process of ERW pipes. Journal of Materials Processing Technology, 2019, 264(2): 295-312.
15. Guowei Zhou, Zihan Li, Dayong Li*, Yinghong Peng, Huamiao Wang, Peidong Wu. Misorientation Development in Continuous Dynamic Recrystallization of AZ31B Alloy Sheet and Polycrystal Plasticity Simulation. Materials Science and Engineering: A, 2018, 730 (7): 438-456.
16. Huamiao Wang, Peidong Wu, Srihari Kurukuri, Michael J. Worswick, Yinghong Peng, Ding Tang, Dayong Li*. Strain rate sensitivities of deformation mechanisms in magnesium alloys. International Journal of Plasticity, 2018, 107(8): 207-222 .
17. Yaguang Li, Yong Sun, Hua Xiao, Hyuk Jong Bong, Lei Shi, Shuhui Li, Dayong Li*, Shichao Ding*, R.H. Wagoner. A numerical study on chain-die forming of the AHSS U-channel and contrast with roll forming, International Journal of Mechanical Sciences 2018, 135: 279–293.
18. Tao Tang, Yichuan Shao, Dayong Li*, Liming Peng, Yinghong Peng, Shaorui Zhang, Peidong Wu. Polycrystal plasticity simulation of extrusion of a magnesium alloy round bar: Effect of strain path non-uniformity, Journal of Alloys and Compounds, 2018, 730: 161-181.
19. Guanghan Wu, Dayong Li*, Xuming Su, Yinghong Peng, Yandong Shi, Li Huang, Shiyao Huang, Weiqin Tang. Experiment and Modeling on Fatigue of the DP780GI Spot Welded Joint, International Journal of Fatigue, 2017, 103(10): 73-85.
20. Guowei Zhou, Zihan Li, Dayong Li*, Yinghong Peng, Hatem S. Zurob, Peidong Wu. A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper. International Journal of Plasticity, 2017,91：48－76.
21. D.Y. Li, Z. Chen, L. Sun, J.W. Lee, R.H. Wagoner. An improved test for shear fracture. International Journal of Solids and Structures, 2016, 97-98: 29-42.
22. X.H. Fan, D. Tang, W.L. Fang, D.Y. Li, Y.H. Peng. Microstructure development and texture evolution of aluminum multi-port extrusion tube during the porthole die extrusion. Materials Characterization, 2016, 118: 468-480.
23. Guowei Zhou, Mukesh K. Jain, Peidong Wu, Yichuan Shao, Dayong Li*, Yinghong Peng, Experiment and crystal plasticity analysis on plastic deformation of AZ31B mg alloy sheet under intermediate temperatures: how deformation mechanisms evolve, International Journal of Plasticity, 2016, 79: 19-47.
24. Tianxia Zou, Dayong Li*, GuanghanWu, Yinghong Peng. Yield strength development from high strength steel plate to UOE pipe, Materials and Design, 2016, 89(1): 1107–1122.
25. Zhong Chen, Hyuk Jong Bong, Dayong Li, R.H. Wagoner. The elastic-plastic transition of metals. International Journal of Plasticity, 2016, 83(8): 178-201.
26. Yichuan Shao, Tao Tang, Dayong Li*, Guowei Zhou, Shaorui Zhang, Yinghong Peng. Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy. Transactions of Nonferrous Metals Society of China, 2016, 26(4): 1063–1072.
27. Yichuan Shao, Tao Tang, Dayong Li*, Weiqin Tang and Yinghong Peng. Crystal plasticity finite element modelling of the extrusion texture of a magnesium alloy, Modelling and Simulation in Materials Science and Engineering, 2015,23: 055011 (19pp)
28. Tianxia Zou, GuanghanWu, DayongLi*, QiangRen ,JiyuanXin, YinghongPeng. A numerical method for predicting O-forming gap in UOE pipe manufacturing, International Journal of Mechanical Sciences, 2015,98:39–58.
29. Qiang Ren, Tianxia Zou, Dayong Li*, Ding Tang, Yinghong Peng. Numerical study on the X80 UOE pipe forming process, Journal of Materials Processing Technology, 2015, 215 (1): 264-277.
30. Weiqin Tang, Shiyao Huang, Dayong Li*, Yinghong Peng. Mechanical anisotropy and deep drawing behaviors of AZ31 magnesium alloy sheets produced by unidirectional and cross rolling, Journal of Materials Processing Technology, 2015, 215 (1): 320-326.
31. Guowei Zhou, K. Ananthaeswara, G. Mitukiewicz, Dayong Li, R.K. Mishra, M.K. Jain, FE simulations of gas blow forming and prediction of forming limit diagram of AZ31 magnesium sheet, Journal of Materials Processing Technology, 2015, 218: 12–22.
32. X. H. Fan, M. Li, D. Y. Li, Y. C. Shao, S. R. Zhang, Y. H. Peng. Dynamic recrystallization and dynamic precipitation in AA6061 aluminium alloy during hot deformation, Materials Science and Technology, 2014, 30(11): 1263 – 1272.
33. Weiqin Tang, Dayong Li*, Shiyao Huang, Shaorui Zhang, Yinghong Peng. Simulation of texture evolution in magnesium alloy: Comparisons of different polycrystal plasticity modeling approaches. Computers & Structures, 2014, 143(9): 1-8.
34. Ding Tang, Qingqing Zhang, Dayong Li, Yinghong Peng. A physical simulation of longitudinal seam welding in micro channel tube extrusion. Journal of Materials Processing Technology, 2014, 214(11): 2777-2783.
35. Y. Shi, P. D. Wu, D. J. Lloyd and D. Y. Li . Effect of Rate Sensitivity on Necking Behavior of a Laminated Tube Under Dynamic Loading. Journal of Applied Mechanics (Transactions of the ASME). 2013, 81(5): 05010.
36. L. M. Li, D. Y. Li*, Y. H. Peng， The simulation of sheet metal forming processes via integrating solid-shell element with explicit finite element method, Engineering with Computers. 2011, 27(3): 273-284.
37. LI L M., PENG Y. H., LI D. Y.*, A stabilized underintegrated enhanced assumed strain solid-shell element for geometrically nonlinear plate/shell analysis, Finite Elements in Analysis and Design, 2011, 47: 511-518.
38. Weiqin Tang, Shaorui Zhang, Yinghong Peng, Dayong Li , Influence of Extrusion parameters on grain size and texture distribution, Journal of Materials Processing Technology, 2011, 211: 1203–1209.
39. Ding Tang, Yinghong Peng, Dayong Li. Mechanical expansion of thick-walled micro-groove tube for high pressure ACR system. Journal of Pressure Vessel Technology (Transactions of the ASME). 2011, 132(2): 1202-1209.
40. Ding Tang, Dayong Li, Yinghong Peng, Zhaohui Du. Optimisation to the tube-fin contact status of the tube expansion process. Journal of Materials Processing Technology. 2011, 211(4): 573-577.
41. Xiaohui FAN, Weiqin TANG,Shaorui ZHANG, Dayong LI, Yinghong PENG, Effects of dynamic recrystallization in extruded and compressed AZ31 magnesium alloy, Acta Metallurgica Sinica(English letters), 2010, 23(5) : 334-342.
42. Shaorui Zhang, Yinghong Peng, Weiqin Tang,Dayong Li, The polycrystalline plasticity due to slip and twinning, Acta Mech., 2010, 212:293–303.
43. Li Juan Hu, Ying Hong Peng, Da Yong Li, and Shao Rui Zhang, Influence of Dynamic Recrystallization on Tensile properties of AZ31 magnesium alloy sheet, Materials and Manufacturing Processes, 2010, 25: 880–887.
44. Ding Tang, Dayong Li, Yinghong Peng, Zhaohui Du, A new approach in evaluation of thermal contact conductance of tube-fin, Applied Thermal Engineering, 2010, 30: 1991-1996.
45. Qingqing Zhang, Ding Tang, Dayong Li, Yinghong Peng, Numerical and experimental study on in-plane bending of microchannel aluminum flat tube, Journal of Materials Processing Technology, 2010, 210: 1876–1884.
46. Ding Tang, Yinhong Peng, Dayong Li. Numerical and experimental study on expansion forming of inner grooved tube. Journal of Materials Processing Technology. 2009, 209: 4668-4674.
47. Jinmao Jiang, Dayong Li, Yinhong Peng, JianXin Li. Research on strip deformation in the cage roll forming process of ERW round pipes. Journal of Materials Processing Technology. 2009, 209: 4850-4856.
48. Ding Tang, Yinhong Peng, Dayong Li*. Experimental and numerical study on expansion of thick-walled micro-groove tube. Journal of Mechanical Engineering Science. 2009, 223: 689-696.
49. Ding Tang, Dayong Li*, Yinhong Peng. Roles of surface booster system on bending of thin-walled copper tube. Journal of Materials Engineering and Performance. 2009, 18: 369–377.
50. Weiqin Tang, Shaorui Zhang, Yinghong Peng, Dayong Li*, Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method, Computational Material Sciences, 2009, 46: 393-399.
51. Dayong Li, Yinghong Peng, Shaorui Zhang, Numerical simulation of sheet metal stamping by using ODF data, International Journal of Mechanical Sciences. 2009, 59(1): 41-51.
52. Luo Yingbing, Li Dayong, Peng Yinghong, Formability and cavitation behavior of superplastic AA5083 aluminum alloy under biaxial tension, Transaction of Nonferrous Metal Society of China, 2006, 16: 1630-1633.
53. Hu L J, Zhang S R, Li D Y, Peng Y H. Numerical analysis of influence of micro-parameters on macro-micromechanical properties of fiber reinforced metal matrix composites, Journal of Materials Processing Technology, 2008, 201(1-3): 736-741.
54. Yinghong Peng, Ding Tang and Dayong Li*, Study on the influence of mandrel type on copper tube rotary draw bending. International Journal of Materials and Product Technology, 2008, 32(4): 406-422.
55. Yinghong Peng, Jinmao Jiang, Dayong Li*, Jianzeng Han, Jianxin Li. Simulation of cage roll forming process of ERW pipes. International Journal of Materials and Product Technology, 2008, 32(4): 388-405.
56. Dayong Li, Yingbing Luo, Yinghong Peng. The Numerical and Analytical Study on Stretch Flanging of V-Shaped Sheet Metal, Journal of Materials Processing Technology, 2007, 189:262-267.
57. Dayong Li, Yinghong Peng, Jilong Yin, Optimization of metal forming process via a hybrid intelligent optimization technique, Structural and Multidisciplinary Optimization, 2007, 34: 229-241.
58. QunFeng Chang, Dayong Li, Yinghong Peng, Xiaoqin Zeng. Experimental and numerical study of warm drawing of AZ31 magnesium alloy sheet. International Journal of Machine Tools & Manufacture. 2007, 47: 436–443.
59. Jilong Yin, Dayong Li, Yinghong Peng，Knowledge Acquisition from Metal Forming Simulation，The International Journal of Advanced Manufacturing Technology, 2006, 29(3-4): 279-286.

60. 蘇旭明，鄭鑫，李大永. 汽車設計的耐久性分析[M]. 機工工業出版社, 2016.

國際學術會議報告：

1) Dayong Li, Recent progress on Chain-die forming. the 6th International Conference on Advanced Steels, Invited speech, Jeju, Korea, 2018.
2) Dayong Li, A crystal plasticity study on the deformation of an AZ31 alloy sheet under elevated temperature, The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Keynote speech, Tokyo, Japan, 2018.
3) Dayong Li, A polycrystal plasticity based thermal-mechanical-DRX coupled modeling method, The 24th International Conference on Plasticity, Damage and Fracture, Keynote speech, Puerto Rico, 2018.
4) Dayong Li, Chain-die forming of AHSS, Materials Science & Technology 2017, Invited speech, Pittsburgh, USA, 2017.
5) Dayong Li, A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper, The 23th International Conference on Plasticity, Damage and Fracture, Keynote speech, Mexico, 2017.
6) 李大永，F(xiàn)ormability Analysis of Aluminum and Magnesium Alloys Sheets by Using Crystal Plasticity Method，國際材聯第十七屆亞洲材料大會暨中國材料大會，邀請報告，中國青島，2016.
7) 李大永，鋁合金微通道管材擠壓成形中的材料集成計算工程，“新材料國際發展趨勢高層論壇”，邀請報告，中國南京，2016.
8) Dayong Li, Numerical simulation of X90 UOE pipe forming process. The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Australia, 2014.
9) Dayong Li, Study on extrusion of aluminum microchannel flat tubes, The 11th International Conference on Numerical Methods in Industrial Forming Processes, Invited speech. China, 2013.
10) Dayong Li, A virtual design system for the cage roll forming process of ERW pipes. 15th International Conference on Advances in Materials and Processing Technologies, Invited speech, Australia, 2012.
11) Dayong Li, Application of crystalline plasticity finite element method in simulation of plastic forming of AZ31 alloy, 7th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys and their Applications, Invited speech, China, 2012.
12) Dayong Li, Dieless bending of flat-tube heat exchangers, The 10th International Conference on Technology of Plasticity, Germany, 2011.


博士學位論文：
李凱，鋁合金微通道擠壓扁管矯形退火中的組織演化，2019。
李亞光，先進高強鋼U型零件鏈模成形研究， 2019。
湯韜，鎂合金擠壓成形熱力耦合晶體塑性-動態再結晶集成計算，2018。
范曉慧，微通道鋁扁管成形中組織演化的微觀表征與模擬研究，2016.
周國偉，AZ31B鎂合金板材溫?zé)崴苄宰冃螜C制與成形極限的實驗與理論研究，2016.
邵一川，鎂合金擠壓成形晶體塑性-動態再結晶集成計算模型，2016.
鄒天下，高強度UOE鋼管成形建模與工藝穩健設計，2015.
張卿卿，鋁合金微通道擠壓扁管成形技術研究，2012.
唐偉琴，AZ31鎂合金板材的晶體塑性理論模型與沖壓成形性能研究，2011。
李麗明，面向板料成形有限元分析的實體殼單元的研究及其在輥彎成形中的應用，2010。
黃詩堯，AZ31鎂合金擠壓成形微觀組織演化的試驗研究與數值模擬， 2010.
蔣勁茂，直縫焊管排輥成形機理與工藝設計方法研究，2009.
唐鼎，內螺紋管-波紋翅片式換熱器成形加工關鍵技術研究，2009.
胡麗娟，AZ31鎂合金板材溫?zé)嶙冃涡袨榈臄?shù)值分析與試驗研究，2009。
萇群峰，鎂合金板材溫?zé)釠_壓成形理論與實驗研究，2008.
羅應兵，輕合金超塑性變形機理與成形工藝研究，2007.
王迎春，薄板坯連鑄液芯壓下工藝數值模擬研究，2006.
尹紀龍，基于塑性成形數值仿真的知識繁衍技術，2005.
張少睿，板成形率無關晶體塑性理論與過程模擬，2004.

碩士學位論文：
Wouter Vanoverberghe, Temperature field optimization of the hot stamping die surface, 2019.
陳偉業，變強度B柱熱沖壓熱區模面優化設計及其溫度控制，2019。
張智恒，附帶局部特征帽形件的鏈模成形技術研究，2019。
羅健璽，不銹鋼型材拉彎成形工藝數值模擬及加載路徑優化設計，2018.
李賢睿，微通道扁管熱擠壓成形過程及承壓性能有限元仿真研究，2017.
黃慧琳，高強度U型鋼鏈模成形有限元仿真研究，2017.
盧鍇鈞，雙壓點電梯導軌校直關鍵技術研究，2016.
郭飛鵬，薄壁鋁翅片成形與優化研究，2016.
周寧，折疊微通道扁管輥彎成形及承壓性能有限元仿真研究，2016.
Clément LABRUGERE，F(xiàn)inite Element Analysis of a Flat-tubes Heat Exchanger’s Die-less Bending Using a Cohesive Zone Damage Model，2016.
蔣祥榮，級間管—翅換熱器的機械脹接模擬與實驗研究，2015。
張宇，基于疲勞裂紋擴展的焊點疲勞壽命預測，2015.
劉重飛，一種雙面快速轉向反射鏡結構設計與研究，2015.
辛紀元，油套管特殊螺紋接頭結構仿真研究與結構優化，2015.
劉振勇，5754_H111鋁合金板材成形極限實驗及數值模擬，2014.
陳梓榮，星載激光測距儀結構設計與仿真分析，2014.
紀宗臣，UOE焊管成型工藝三維有限元仿真研究，2014.
吳興彬，聚四氟乙烯本構模型開發及計量泵密封結構仿真研究，2014.
王卓，微通道平行流換熱器無模彎曲成形模擬與實驗研究，2013.
趙陽，UOE焊管成型過程仿真研究，2013.
張志偉，微通道平行流換熱器成形加工關鍵技術研究，2012.
鐘敏，AZ31鎂合金板材溫?zé)岢尚螛O限及回彈研究，2012。
徐志偉，往復泵曲軸疲勞強度分析及動載荷測試，2011。
高宇飛，排輥成形工藝參數化設計系統集成開發技術， 2010.
陳殿蘋，微通道扁管面內繞彎成形過程的數值仿真及知識發現，2010.
黃華，高強鋁合金板材溫?zé)岢尚螌嶒炁c理論研究，2010。
史文超，TRIP780高強鋼動態變形行為的宏微觀研究，2009.
張鵬，空調管翅式換熱器成形工藝的仿真研究，2008.
田成達，DP780高強鋼動態力學行為研究，2008。
谷中瑩，基于有限元仿真的erw焊管排輥成型孔型的研究，2008.
李友峰，寶鋼ERW610焊管成型機組參數化建模技術，2007.
仇素萍，方管雙輥交互式輥彎成形新技術的數值仿真研究，2007.
王永寧，鋁蜂窩模型及其在汽車碰撞壁障數值模擬中的應用，2007。
謝敏，基于Web的塑性成形仿真可視化技術研究，2005.
董俊，基于知識的鋁型材擠壓模具智能設計的關鍵技術研究，2004.
羅應兵，鎂合金薄板沖壓成形數值模擬關鍵技術研究，2004.

1. Modern CAE Technology and Application
For Master students
Credit hour：36
Credit：2

2.Engineering Materials
For undergraduate
Credit hour：51
Credit：3

3.Mechanical Optimization
For undergraduate
Credit hour：51
Credit：3

2007―2011 Member of Academic Committee of Plastic Forming Theory and Digialization, China Plastic Forming Acadamy.
2007―2016 Member of Mechanics' Application Commitee, China Mechanics Acadamy.

2007 Shanghai Science and Technology Progress Award
2013 Science & Technology Progress Award, Ministry of Education
2014 National Science & Technology Progress Award
2022 Shanghai Science and Technology Progress Award