1996-1999, Ph.D. Materials Processing Technology Jilin University of Technology
1993-1996, M.S. Materials Processing Technology Habin University of Science and Technology
1989-1993, B.S. Materials Processing Technology Habin Institute of Technology

2013-Present, Vice Director, State Key Lab. of Mechanical System and Vibration
2008-Present, Adjunct Prof., Baoshan Iron & Steel Co., Ltd.
2007- Present, Prof., Department of Mechanical Engineering, Shanghai Jiao Tong University
2001-2007, Associate Professor, Department of mechanical Engineering, Shanghai Jiao Tong University
1999-2001, Postdoc. Auto-body Manufacturing Technology Center, Shanghai Jiao Tong University

Metal forming plasticity theory
Advanced forming technology for thin-walled structures
Hot stamping and warm forming
Phase transformation induced Plasiticity

Coordination between geometry and performance for metal forming-additive manufacturing of integrally stiffened cylinders, Sub-project of National Program on Basic Research Project of China, ￥5,100,000, (Participator), 01/2018-12/2022

High-performance Ultra-High-Strength Steel, National Key R&D Program of China(2017YFB0304400), ￥15,000,000, (Participator), 01/2018-12/2022

Research on Advanced hot stamping technology and Its Industralization, Baosteel Co., Ltd., ￥970,000, (PI), 04/2017-03/2019

Forming Technology for Complex Thin-walled Stainless Steel Corrugated Side Wall,
CRRC Qingdao Sifang Co., Ltd, ￥700,000, (PI), 01/2018-01/2019

Size effect and Control for stator lamination manufacturing with ultra-thin electrical steel sheets, Joint Funds of the National Natural Science Foundation of China (U1360203), ￥2,000,000, (PI), 01/2014-12/2017

Thermal-mechanical Fatigue Life Prediction for hot stamping die, Baosteel Co., Ltd., ￥1,150,000, (PI), 04/2015-4/2016

Plastic processing technology, mould and equipment, National Outstanding Youth Science Foundation(51222505), ￥1,000,000, (PI), 01/2013-12/2015

Residual Stress Regulation during machining for large-scale thinned-walled structures, National Program on Key Basic Research Project of China (973 Program), (2010CB731703), ￥3,900,000, (PI), 01/2010-08/2014

Numerical Simulation and Processing Optimization on Roller hemming for automotive panels, National High-tech R&D Program of China (863 Program) (2007AA04Z145), ￥650,000, (PI), 09/2007-08/2009

著作：
[1] 林忠欽，李淑慧，于忠奇，蔣浩民，汽車板精益成形技術（國家自然科學基金研究專著），機械工業出版社，32萬字，2009年，I S B N：9787111262299, 2010中國機械工業科學技術一等獎（著作類）

[2] 林忠欽，李淑慧，朱亞群，《車身覆蓋件沖壓成形仿真》 , 機械工業出版社, ISBN9787111152019，2007上海汽車工業教育基金會優秀著作一等獎

[3] 裴瑞琳，李淑慧，張延松，電機用電工鋼，（英） Philip, Beckley著，上海交通大學出版社 2018.3 (譯著)

2018:
[31] Shuhui Li*, Ji He*, Bin Gu, Danielle Zeng, Z. CedricXia, Yixi Zhao, Zhongqin Lin, Anisotropic fracture of advanced high strength steel sheets: Experiment and theory, International Journal of Plasticity, 2018(103)：95-118

[30] He Ji, Gu B, Li Y, Li S*. Forming Limits Under Stretch-Bending Through Distortionless and Distortional Anisotropic Hardening. ASME Journal of Manufacturing Science and Engineering 2018;140(12):121013-121013-14.

[29] He Ji, Shuhui Li*, Shanshuai Wang, Deformation behavior of sandwich hemispherical structure under axial compression at low temperature, Composite Structures, 2018, 203: 267-277

[28] Zou Danqing, Shuhui Li*, Ji He, The Deformation Induced Martensitic Transformation and Mechanical Behavior of Quenching and Partitioning steels under Complex Loading Process, Materials Science & Engineering A, 2018(715): 243-256

[27] Wang zhe, Shuhui Li*, Ronggao Cui, Xinke Wang, Weigang Zhang, Modeling of Surface Layer and Strain Gradient Hardening Effects on Micro-Bending of Non-oriented Silicon Steel Sheet, Materials Science & Engineering A, 2018(711) : 498~507

[26] Zhe Wang, Shuhui Li *, Ronggao Cui, Xinke Wang, Influence of Grain Size and Blanking Clearance on Magnetic Properties Deterioration of Non-Oriented Electrical Steel, IEEE TRANSACTIONS ON MAGNETICS, 2018.200

[25] Cui R , Li S , Wang Z , et al. A modified residual stress dependent Jile-Atherton hysteresis model[J]. Journal of Magnetism & Magnetic Materials, 2018, 465: 578-584.

[24] Ji He, Shuhui Li*, Wang Zhe, Optimum clearance determination in blanking coarse-grained non-oriented electrical steel sheets: experiment and simulation, International Journal of Materials Forming,

2017
[23] Bin Gu, JI HE, Shuhui Li, Yuan Chen, Yongfeng Li, Cyclic sheet metal test comparison and parameter calibration for springback prediction of dual phase steel sheets. ASME/Journal of Manufacturing Science and Engineering, 2017,139(9).

[22] Danqing Zou, Shuhui Li*, Ji He. Temperature and Strain rate dependent Deformation Induced Martensitic Transformation and Flow Behavior of Quenching and Partitioning Steels [J]. Materials Science and Engineering A, 2017,680:54-63.

[21] Shanshuai Wang, Shuhui Li*, Ji He. Buckling Behavior of Sandwich Hemispherical Structure Considering Deformation Modes under Axial Compression[J]. Composite Structures, 2017,163:312-324.

[20] Dong L, Li S*, He J. Ductile fracture initiation of anisotropic metal sheets[J]. Journal of Materials Engineering and Performance, 2017, 26(7)：3285-3298

2016
[19] Dong L, Li S, He J, et al. Investigation on shearing and local formability of hot-rolled high strength plates[J]. Journal of Manufacturing Science & Engineering, 2016，138(9)： 091001-091013.

[18] Shanshuai Wang,Shuhui Li,Ji He,Yixi Zhao.Asymmetric Postbuckling Behavior of Hemispherical Shell Structure Under Axial Compression [J]Journal of Engineering Materials and Technology, 2016, 138(1): 011005.

[17] Shuhui Li, Danqing Zou, Cedric Xia, Ji He. Effect of Strain Rate on Deformation-Induced Martensitic Transformation of Quenching and Partitioning Steels [J]. Steel Research International, 2016, 87(10): 1302-1311.

2015
[16] Shuhui Li*, JiHe, YixiZhao, ShanshuaiWang, LiangDong, RonggaoCui, Theoretical failure investigation for sheet metals under hybrid stretch-bending loadings[J], International Journal of Mechanical Sciences, 2015, 104: 75–90
2014

[15] Shuhui Li*, Bo Hou, Material Behavior Modeling in Machining Simulation of 7075-T651 Aluminum Alloy[J], ASME/Journal of Engineering Materials and Technology, 2014, 136: 1-14

[14] Shuhui Li*, Ji He, Z. Cedric Xia, Danielle Zeng, Bo Hou. Bifurcation Analysis of Forming Limits for an Orthotropic Sheet Metal[J]. ASME/Journal of Manufacturing Science and Engineering, 2014, 136: 1-10.

~2013
[13] Hongqing Shen, Shuhui Li*, Xiaofeng Ni, G.L. Chen, A modified displacement adjustment method to compensate for surface deflections in the automobile exterior panels. Journal of Materials Processing Technology, 2013, 213(11): 1943–1953

[12] Shuhui Li*, Xianfeng Chen, Zhongqin Lin, Study on formability of tube hydroforming through elliptical die inserts[J], Journal of Materials Processing Tech，2012, 212: 1916

[11] Shuhui Li*, Xing Hu, Yixi Zhao, Zhongqin Lin, Nanqiao Xu，Cyclic hardening behavior of roller hemming in the case of aluminum alloy sheets[J], Materials & Design, 2011, 32: 2308

[10] Shuhui Li*, G.Zeng, Y.F.Ma, Y.J.Guo, X.M.Lai, Residual stresses in roll-formed square hollow sections[J], Thin-Walled Structures, 2009, 47: 505

[9] S.H.Li, G.Zeng, Y.F.Ma, Y.J.Guo, X.M.Lai, Residual stresses in roll-formed square hollow sections, Thin-Walled Structures, Thin-Walled Structures, vol.47, 2009: 505-513

[8] Xianghe Xu, Shuhui Li, Weigang Zhang, Zhongqin Lin, Analysis of thickness distribution of square-sectional hydroformed parts, Journal of Materials Processing & Technology, vol.209, No.16, 2009:158-164

[7] T.K. Shan, S.H. Li, W.G. Zhang, Z.G. Xu, Prediction of martensitic transformation and deformation behavior in the TRIP steel sheet forming, Materials and Design, vol.29, 2008: 1810-1816

[6] Shuhui Li*, YANG Bing, ZHANG Weigang, LIN Zhongqin, Loading path Prediction for tube hydroforming process using a fuzzy control strategy[J], Materials and Design, 2008, 29: 1110

[5] LI Shuhui, YANG Bing, ZHANG Weigang, LIN Zhongqin, Loading path Prediction for tube hydroforming process using a fuzzy control strategy, Materials and Design, vol.29, 2008: 1110-1116

[4] Shuhui Li, Xianghe Xu, Weigang Zhang, Zhongqin Lin. Study on the crushing and hydroforming processes of tubes in a trapezoid-sectional die, International Journal of Advanced Manufacturing Technology. DOI: 10.1007/s00170-008-1702-3

[3] W.J. Dan, S.H. Li, W.G. Zhang, Z.Q. Lin, The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel, Materials and Design, vol.29, No.3, 2008: 604-612

[2]Shuhui Li*, Dan W. J., Zhang W. G., Lin Z. Q., A model for strain-induced martensitic transformation of TRIP steel with pre-strain[J], Computational Materials Science, 2007, 40: 292-299

[1]Li Shuhui, Lin Zhongqin, Xu Weili, An improved equivalent drawbead model and its application, Journal of Materials Processing Technology, vol.121, 2002: 308-312

Conference Paper:
11.Chun Xu and Shuhui Li, Correlation between Strain and Exfoliating Performance of Galvannealed DP steels，2006 ASME International Conference on Manufacturing Science and Engineering, October 8-11, 2006, Ypsilanti, MI, MSEC2006-21021
12.W. J. Dan, S. H. Li, W. G. Zhang and Z. Q. Lin, A TENSILE CHARACTERIZATION STUDY OF METAL SHEET IN LARGE-STRAIN, 2006 ASME International Conference on Manufacturing Science and Engineering, October 8-11, 2006, Ypsilanti, MI, MSEC2006-21022 (EI 064810269885)
13.B.Yang, S.H.Li, P.Hu, Z.Q.Lin, W.G. Zhang. Finite element simulation of the tube preforming and hydroforming process for an automobile subframe, Proceedings of the International Conference on Tubehydroforming, Kyungju, Korea,10-11, Nov.2005. P: 96-100.

Principle of Engineering Materials
STUDENTS ORIENTED：Junior
TEXTBOOK/REQUIRED MATERIAL：Materials Science and Engineering: An Introduction,W.D. Callister, Jr., 9th edition, John Wiley and Sons,Inc.

Introductory course to engineering materials and processing. Properties (mechanical, thermal and electrical) of metals, polymers, ceramics materials. Correlations of these properties with: (1) their internal structures (atomic structure, bonding, crystal structure, micro-and macro); (2) service conditions (mechanical, thermal); and (3) processing

2008~Present， Adjunct Prof., Baoshan Iron & Steel Co., Ltd.

(1) Products, Processing and Dies for Hydroforming Tubes, 2017 First Prize for Technology Innovation of China BAOWU Steel Group Corporation Limited(7）
(2) Accuracy and Residual Stress Regulation for Roll Forming of High Strength Steel，2014 Second Prize for Shanghai Scientific and Technological Progress（1）
(3) Lean Forming Technology for Auto-body Manufacturing, 2005 Second Prize for National S&T Progress Award（4）
(6) Quality Control Technology for Auto-Body Manufacturing, 2002 Second Prize for National S&T Progress Award（6）
2017 TANGLIXIN Prominent Educator
2010 SHUGUANG Scholar for Shanghai Education Commission, China
2008 New Century Excellent Talents in University of Ministry of Education of China