2009-2016    上海交通大學       機械工程     工學博士  
2005-2009    天津大學   機械設計制造及其自動化   工學學士

2024-至今    上海交通大學機械與動力工程學院    教授
2021-2024   上海交通大學機械與動力工程學院    副教授
2018-2020   上海交通大學機械與動力工程學院    助理教授
2017-2018   德國Helmholtz-Jüich研究中心       博士后
2016-2018   上海交通大學機械與動力工程學院   博士后

薄板構件裝配理論與技術

新能源電池制造及診斷研究
燃料電池多尺度建模與仿真

歡迎對新能源電池或微細制造方向感興趣的本科、碩士、博士聯系

2026-2029  國家自然科學基金面上項目  質子交換膜電解槽剛柔層疊裝配界面損傷演化機制與工藝調控 負責人

2025-2028  “葉企孫”科學基金    一體式再生燃料電池   課題負責人

2024-2026  工信部高技術船舶專項“PEM電解槽材料與裝配技術研究”   任務負責人

2024-2026  吉林省重點專項課題    燃料電池堆仿真與驗證關鍵技術研究    負責人

2024-2025  上海商用飛機系統工程科創中心聯合基金重點項目   負責人

2023-2026 國家重點研發計劃課題   單電池全尺寸結構及伏安性能設計仿真模塊開發   負責人
2021-2024 國家自然科學基金面上項目  燃料電池層疊裝配的氣體擴散層細觀接觸行為及調控機制   負責人
2021-2024 廣州市重點研發計劃課題  基于金屬雙極板的燃料電池電堆開發及驗證    負責人
2018-2020  國家自然科學基金青年項目   燃料電池質子交換膜機械失效機理與預測模型  負責人
2020-2023  上海市自然科學基金     燃料電池運行工況下質子交換膜細觀損傷行為及失效預測模型  負責人
2017-2021  國家重點研發計劃子課題    金屬雙極板制備技術及表面鍍層開發   負責人
2017-2020 上海汽車工業科技發展基金    燃料電池金屬雙極板鍍層失效分析與工藝優化 負責人
2020-2023  企業合作項目      燃料電池金屬極板開發基礎研究   負責人
2020-2021  機械系統與振動國家重點實驗室自主課題    負責人
2018-2021 上海交通大學新進教師啟動計劃項目      負責人
2018-2019  博士后基金特別資助     負責人
2017-2018  博士后基金面上項目    負責人

2014-2017 上海科技創新行動計劃  “超薄燃料電池金屬極板研究與開發”  參與
2014-2016  國家自然科學基金青年項目 “燃料電池金屬氣體擴散層結構的力學行為建模及成形成性工藝” 參與
2013-2015  國家863項目子課題 “燃料電池低成本膜電極組件/雙極板及電堆制備技術研究”  參與
2014-2015  上海汽車工業（集團）總公司，“燃料電池用金屬雙極板開發”  參與
2013-2016  國家自然科學基金面上項目  “電致塑性輔助微細模壓成形介觀尺度效應機理與工藝研究 ”  參與

2025年度

Zhou X, Qiu D, Xu Z, Peng L. Modeling the crack propagation of ductile fibril reinforced polymer membrane with the consideration of drawing fibrils. J Mech Phys Solids. 2025;200:106118.

Guo M, Qiu D, Yi P, Peng L. Study on the insulation resistance of proton exchange membrane fuel cell stacks. Renew Energ. 2025;241:122318.

Zhang P, Qiu D, Peng L. Prediction of non-uniform reactions in PEMFC based on the multi-physics quantity fusion graph auto-encoder network. Appl Energ. 2025;383:125365.

Zuo S, Xu Z, Yi P, Qiu D, Peng L. Fast and High-Angle-Climbing Capable Self-Driven Surface Directional Liquid Transport via Bio-Inspired Eccentric Channels. Adv Funct Mater. 2026;36:e10157.

Sun L, Yang H, Xu Z, Shahzamanian MM, Qiu D, Peng L, et al. Unraveling the co-evolution of microstructure and damage in α-titanium. Int J Mech Sci. 2025;291-292:110161.

Huang F, Sun C, Qiu D, Yang D, Peng L, Zhang T, et al. Modeling and analysis of two-phase flow maldistribution in the dead-ended anode channels for proton exchange membrane fuel cells with parallel flow fields. Phys Fluids. 2025;37.

Qiu D, Xu Z, Shao H, Peng L. Analytical Modeling of Water Droplet Behavior at the Gas Channel Corner for Proton Exchange Membrane Fuel Cells. Journal of Electrochemical Energy Conversion and Storage. 2024;22.

2024年度

Ye, L., Qiu, D., Ni, M., Peng, L., 2024. Insight into the mechanisms and in-plane reaction heterogeneity of the dynamic response of proton exchange membrane fuel cells. Chem Eng J 498, 155772.

Song, S., Qiu, D., Xu, Z., Yi, P., Peng, L., 2024. Insight into the crack evolution and mechanism of catalyst-coated membrane undergoing freeze–thaw cycling in fuel cells. Eng Fract Mech 309, 110405.

Liu, Y., Diankai, Q., Xu, Z., Yi, P., Peng, L., 2024. Comprehensive Analysis of the Gradient Porous Transport Layer for the Proton-Exchange Membrane Electrolyzer. Acs Appl Mater Interfaces.

Li, P.a., Zhou, Z., Qiu, D., Peng, L., 2024. Insight into Oxygen Transport in Proton Exchange Membrane Water Electrolyzers by In Situ X-Ray Characterization. Advanced Science n/a, 2405658.

Ye, L., Qiu, D., Peng, L., Lai, X., 2024. Conduction mechanism analysis and modeling of different gas diffusion layers for PEMFC to improve their bulk conductivities via microstructure design. Appl Energ 362, 122987.

Wang, Z., Qiu, D., Peng, L., Lai, X., 2024. Study on assembly error effect on the performance of proton exchange membrane fuel cell considering membrane electrode assembly deformation. J Power Sources 610, 234746.

Liao, S., Qiu, D., Yi, P., Peng, L., 2024. Optimization design of assembly sequence for the proton exchange membrane fuel cell stacks with dimensional errors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241290929.

2023年度

D. Qiu, X. Zhou, M. Chen, Z. Xu, L. Peng. Optimization of control strategy for air-cooled PEMFC based on in-situ observation of internal reaction state. Appl Energ. 350 (2023) 121752.
Z. Zhou, L. Ye, D. Qiu, L. Peng, X. Lai. Experimental investigation and decoupling of voltage losses distribution in proton exchange membrane fuel cells with a large active area. Chem Eng J. 452 (2023) 139497.
X. Zhou, D. Qiu, L. Peng, X. Lai. Modeling the viscoelastic-viscoplastic behavior of glassy polymer membrane with consideration of non-uniform sub-chains in entangled networks. Int J Solids Struct. 282 (2023) 112469.
X. Zhou, D. Qiu, L. Peng, X. Lai. Numerical and experimental characterization of gas permeation through membranes with consideration of mechanical degradation in proton exchange membrane fuel cells. J Power Sources. 556 (2023) 232489.
Z. Xu, D. Qiu, M.M. Shahzamanian, Z. Zhou, D. Mei, L. Peng. An improved springback model considering the transverse stress in microforming. Int J Mech Sci. 241 (2023) 107947.
W. Liu, D. Qiu, L. Peng, X. Lai. Study on the nonuniform mechanical degradation of membranes considering temperature and relative humidity distribution in proton exchange membrane fuel cells. Fuel Cells. 23 (2023) 170-80.


2022年度

D. Qiu, P. Liang, X. Zhao, Y. Wang, L. Peng, X. Lai. An analytical model for gas leakage through contact interface in proton exchange membrane fuel cells. Int J Hydrogen Energ. 47 (2022) 32273-86.
L. Ye, D. Qiu, L. Peng, X. Lai. Microstructures and electrical conductivity properties of compressed gas diffusion layers using X-ray tomography. Appl Energ. 326 (2022) 119934.
Y. Wan, D. Qiu, P. Yi, L. Peng, X. Lai. Design and optimization of gradient wettability pore structure of adaptive PEM fuel cell cathode catalyst layer. Appl Energ. 312 (2022) 118723.
Z. Zhou, D. Qiu, L. Peng, X. Lai. Channel/rib patterns optimization of a proton exchange membrane fuel cell by combining down-the-channel performance model and genetic algorithm. Int J Heat Mass Tran. 183 (2022) 122235.
P.a. Li, D. Qiu, L. Peng, S. Shen, X. Lai. Analysis of degradation mechanism in unitized regenerative fuel cell under the cyclic operation. Energ Convers Manag. 254 (2022) 115210.
P.a. Li, D. Qiu, L. Peng, X. Lai. kW-grade unitized regenerative fuel cell stack design for high round-trip efficiencies. Energ Convers Manag. 270 (2022) 116277.
S. Liao, D. Qiu, P. Yi, L. Peng, X. Lai. Modeling of a novel cathode flow field design with optimized sub-channels to improve drainage for proton exchange membrane fuel cells. Energy. 261 (2022) 125235.
F. Huang, D. Qiu, L. Peng, X. Lai. Optimization of entrance geometry and analysis of fluid distribution in manifold for high-power proton exchange membrane fuel cell stacks. Int J Hydrogen Energ. 47 (2022) 22180-91.
Z. Zhang, M. Guo, Z. Yu, S. Yao, J. Wang, D. Qiu, et al. A novel cooperative design with optimized flow field on bipolar plates and hybrid wettability gas diffusion layer for proton exchange membrane unitized regenerative fuel cell. Energy. 239 (2022) 122375.

2021年度

D. Qiu, L. Peng, P. Yi, W. Lehnert, X. Lai, Review on proton exchange membrane fuel cell stack assembly: Quality evaluation, assembly method, contact behavior and process design, Renewable and Sustainable Energy Reviews, 152 (2021) 111660.
Z. Zhou, D. Qiu*, L. Peng, X. Lai, Channel/rib patterns optimization of a proton exchange membrane fuel cell by combining down-the-channel performance model and genetic algorithm, Int J Heat Mass Tran, 183 (2022) 122235.
F. Huang, D. Qiu, Z. Xu, L. Peng, X. Lai, Analysis and improvement of flow distribution in manifold for proton exchange membrane fuel cell stacks, Energy, 226 (2021) 120427.
P.a. Li, D. Qiu, L. Peng, S. Shen, X. Lai, Analysis of degradation mechanism in unitized regenerative fuel cell under the cyclic operation, Energ Convers Manag, 254 (2022) 115210.
W. Yue, D. Qiu, P. Yi, L. Peng, X. Lai, Study on the degradation mechanism of the frame for membrane electrode assembly in proton exchange membrane fuel cell, Int J Hydrogen Energ, 46 (2021) 36954-36968.
L. Peng, Y. Wan, D. Qiu, P. Yi, X. Lai, Dimensional tolerance analysis of proton exchange membrane fuel cells with metallic bipolar plates, J Power Sources, 481 (2021) 228927.
Z. Zhang, M. Guo, Z. Yu, S. Yao, J. Wang, D. Qiu*, L. Peng, A novel cooperative design with optimized flow field on bipolar plates and hybrid wettability gas diffusion layer for proton exchange membrane unitized regenerative fuel cell, Energy, 239 (2022) 122375.

2020年度

Qiu D, Peng L, Tang J, Lai X. Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels. Energy. 2020;198:117334.
Qiu D, Liang P, Peng L, Yi P, Lai X, Ni J. Material behavior of rubber sealing for proton exchange membrane fuel cells. Int J Hydrogen Energ. 2020;45(8):5465-73.
Peng L, Shao H, Qiu D, Yi P, Lai X. Investigation of the non-uniform distribution of current density in commercial-size proton exchange membrane fuel cells. J Power Sources. 2020;453:227836.
Huang F, Qiu D, Lan S, Yi P, Peng L. Performance evaluation of commercial-size proton exchange membrane fuel cell stacks considering air flow distribution in the manifold. Energ Convers Manag. 2020;203:112256.
Zhou Z, Qiu D, Zhai S, Peng L, Lai X. Investigation of the assembly for high-power proton exchange membrane fuel cell stacks through an efficient equivalent model. Appl Energ. 2020;277:115532.
Liu W, Qiu D, Peng L, Yi P, Lai X. Mechanical degradation of proton exchange membrane during assembly and running processes in proton exchange membrane fuel cells with metallic bipolar plates. Int J Energ Res. 2020;44:8622-34.
Xu Z, Qiu D, Yi P, Peng L, Lai X. Towards mass applications: A review on the challenges and developments in metallic bipolar plates for PEMFC. Progress in Natural Science: Materials International. 2020.

2019年度

Qiu D, Peng L, Lai X, Ni M, Lehnert W, Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell, Renewable and Sustainable Energy Reviews, 2019; 113:109289.
Shao H, Qiu D, Peng L, Yi P, Lai X, In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells, Journal Of Power Sources, 2019; 412:717-724.
Shao H, Qiu D, Peng L, Yi P, Lai X, Modeling and analysis of water droplet dynamics in the dead-ended anode gas channel for proton exchange membrane fuel cells, Renewable Energy, 2019; 138:842-851.
Xu Y, Qiu D, Yi P, Lan S, Peng L, An integrated model of the water transport in nonuniform compressed gas diffusion layers for PEMFC, International Journal Of Hydrogen Energy, 2019; 44:13777-13785.
Irmscher P, Qiu D, Jan?en H, Lehnert W, Stolten D, Impact of gas diffusion layer mechanics on PEM fuel cell performance, International Journal Of Hydrogen Energy, 2019; 44:23406-23415.

2018年度

Qiu D*, Jan?en H, Peng L, Irmscher P, Lai X, Lehnert W, Electrical resistance and microstructure of typical gas diffusion layers for proton exchange membrane fuel cell under compression, Applied Energy, 2018; 231:127-137.
Qiu D, Peng L*, Liang P, Yi P, Lai X, Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells, Energy, 2018; 165:210-222.
Qiu D, Peng L*, Yi P, Lai X, Lehnert W, Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments, Energy Conversion And Management, 2018; 174:814-823.
Liang P, Qiu D, Peng L, Yi P, Lai X*, Ni J, Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates, Energy Conversion And Management, 2018; 169:334-344.

2017年度

Qiu D, Peng L, Yi P, Lai X*, A micro contact model for electrical contact resistance prediction between roughness surface and carbon fiber paper, International Journal Of Mechanical Sciences, 2017; 124–125:37-47.
Qiu D, Peng L, Yi P, Lai X*, Jan?en H, Lehnert W, Contact behavior modelling and its size effect on proton exchange membrane fuel cell, Journal Of Power Sources, 2017; 365:190-200.

2016年以前
Qiu D, Yi P, Peng L, Lai X*, Channel Dimensional Error Effect of Stamped Bipolar Plates on the Characteristics of Gas Diffusion Layer Contact Pressure for Proton Exchange Membrane Fuel Cell Stacks, ASME-Journal of Fuel Cell Science and Technology, 2015; 12:041002.
Qiu D, Yi P, Peng L, Lai X*, Assembly design of proton exchange membrane fuel cell stack with stamped metallic bipolar plates, International Journal Of Hydrogen Energy, 2015; 40:11559-11568.
Qiu D, Yi P, Peng L, Lai X*, Study on shape error effect of metallic bipolar plate on the GDL contact pressure distribution in proton exchange membrane fuel cell, International Journal Of Hydrogen Energy, 2013; 38:6762-6772.
Peng L, Qiu D, Yi P, Lai X*, An Analytical Model for Contact Pressure Prediction Considering Dimensional Error of Stamped Bipolar Plate and Gas Diffusion Layer in Proton Exchange Membrane Fuel Cell Stack Assembly, ASME-Journal of Electrochemical Energy Conversion and Storage, 2016; 13:021007.
Liang P, Qiu D, Peng L, Yi P, Lai X*, Ni J, Structure failure of the sealing in the assembly process for proton exchange membrane fuel cells, International Journal Of Hydrogen Energy, 2017; 42:10217-10227.

會議論文

Qiu D, Peng L, Yi P, Lai X, Jan?en H, Lehnert W, Multiscale Numerical Model for Contact Resistance Prediction in the Proton Exchange Membrane Fuel Cell, ECS Transactions, 2017; 80:73-85.
Qiu D, Yi P, Peng L, Lai X,  An Assembly Model for PEM Fuel Cell with Consideration of Size Error Effect of Bipolar Plate. 20th World Hydrogen Energy Conference, WHEC 2014, Gwangju City，Korea，2014.06.16-06.21.
Philipp Irmscher, Diankai Qiu, Holger Jan?en, Werner Lehnert, Detlef Stolten, Impact of Gas Diffusion Layer Mechanics on PEM Fuel Cell Performance, ECS conference paper.
Huang F, Qiu D, Peng L, Lai X. Entrance Effects on the Flow Distribution in Manifold of Commercial-Size Proton Exchange Membrane Fuel Cell Stacks. ECS Transactions. 2019;92(8):375-85.

燃料電池電堆的自動化裝配裝置，授權專利號：ZL 201110065618.2
用于燃料電池的金屬氣體擴散層及其制備方法，授權專利號：ZL 201010605127.8
一種雙向可逆燃料電池系統，  授權專利號：ZL  201710631167.1
一種可逆燃料電池陰極流場結構及可逆燃料電池，  授權專利號：ZL201710712660.6
高深寬比金屬薄板微細結構的加工裝置及方法，  授權專利號： ZL201611091387.1
用于制備燃料電池金屬雙極板非晶碳膜磁控濺射連續線，  授權專利號： ZL201610984083.1
一種溫濕度均勻性增強的燃料電池單電池及電堆，  授權專利號： ZL201710741058.5
一種燃料電池金屬雙極板高效環形真空鍍膜裝置，  授權專利號：  ZL201710660443.7
等