1985.05―1989.04哈爾濱工業大學 機械工程系博士
1982.03―1984.11哈爾濱工業大學 機械工程系碩士
1978.03―1982.02哈爾濱工業大學 機械工程系學士

1984.11―1986.09  哈爾濱工業大學 機械工程系 助教
1986.09―1989.11  哈爾濱工業大學 機械工程系 講師
1989.11―1991.11  哈爾濱工業大學 機械工程系 副教授
1991.12―2004.01  哈爾濱工業大學 機電工程學院 教授
1993.07―2004.01  哈爾濱工業大學 機電工程學院 教授 博士生導師
2004.01―現在        上海交通大學 機械與動力工程學院 教授 博士生導師
1987.01―1988.11  日本東京大學 生產技術研究所 外國人博士研究員
1996.05―1998.05  美國Nebraska-Lincoln大學 非傳統制造中心 客座教授            
1984.11―2004.01  在哈爾濱工業大學工作期間歷任中心副主任、系主任、科研處處長、校長助理、深圳研究生院院長等職
2004.01―2009.12  在上海交通大學工作期間歷任副院長、系主任等職
2010.01~2013.12  機械系統與振動國家重點實驗室副主任
2011.04~2017.03  密西根學院副院長
2023.07~現在        上海交通大學特聘教授

特種加工技術
面向智能制造的特種加工數控系統
新架構特種加工智能數控系統
人工智能與智能控制在特種加工中的應用
微細特種加工技術

2019—現在    CIRP副會員

1997―現在    中國機械工程學會特種加工分會 副理事長
2003―2023  中國機械工程學會 理事
2008―現在   全國特種加工機床標準化技術委員會 副主任委員
2007―現在   《制造技術與機床》編委
2009―現在   《Frontiers of Mechanical Engineering》編委
2010年 CIRP系列國際會議--第16屆國際電加工會議，大會主席

2023.01~2026.12 國家自然科學基金項目“電火花加工放電通道等離子體特性研究（52275450）”，項目負責人
2019.01~2021.12 國家自然科學基金國際合作交流重點項目 "高性能合金的電化學復合加工方法研究（51961135201）"，項目負責人
2018.01～2021.12   國家自然科學基金項目“渦輪葉片氣膜冷卻孔高速電火花加工防背傷方法(51775341)” ，項目負責人
2013.01～2017.12   國家自然科學基金重點項目“高速電弧放電加工技術基礎研究(51235007)”，項目負責人
2010.01～2012.12   國家自然科學基金納米制造重大研究計劃項目“納米放電加工方法研究（90923020）”，項目負責人
2007.01～2010.12   國家自然科學基金重點項目“微細電加工及其微小裝備的基礎研究(50635040)”，第二負責人
2007.07～2010.06   國家科技支撐計劃項目“吸紗風道壓力平衡系統的研發(061231132 )”，項目負責人
2006.12～2008.12   國家863項目“集成式桌面型微細電加工機床(2006AA04Z332)”，項目負責人
2006.01～2008.12   國家自然科學基金項目“集束電極電火花加工技術研究(50575136)”，項目負責人
2004.06～2006.06   上海市科委重點攻關項目“微細電加工機床的研制（041111005）”，項目負責人

已出版的教材與專著：
趙萬生 顧琳 著，《高速電弧放電加工技術原理與應用》. 國防工業出版社，2023.1
趙萬生 著，《先進電火花加工技術》. 國防工業出版社, 2003.10
趙萬生 編著，《實用電加工技術》. 機械工業出版社，2002.4
趙萬生 主編，《特種加工技術》. 高等教育出版社，2001.6
劉晉春、趙家齊、趙萬生主編，《特種加工》第四版. 機械工業出版社，2004.7

CIRP Annals 論文：

[1] Li, B., Yao, Z., Lu, H., Gao, Q., Lu, J., Xi, X., Zhao, W.*, 2025, Segmented 5-axis flank milling: a fast electrical

discharge milling strategy for diffuser-shaped film cooling holes, CIRP Annals-Manufacturing Technology, 74(1): 227-231

[2] Guo, J., Li, Q., Tong, Z.*, Zhao, W., Li, L., 2024, A New Internal Surface Polishing Method for Sub-Millimeter Slender

Tube with Varying Diameters, CIRP Annals - Manufacturing Technology, 73(1): 265-268.

[3] Wang, J., Gao, Q., Lu, J., Zheng, Q., Xi, X., Zhang, Y., Zhao, W.*, 2024, Fast ED-milling of High Volume Fraction

Al/SiCp Metal Matrix Composites, CIRP Annals - Manufacturing Technology, 73(1): 121-124.

[4] Wang, J., Ma, J., Lu, Y., Gao, Q., Xi, X., Gu, L., Zhao, W.*, 2023, Efficient Machining of Diffuser-shaped Film Cooling

Holes by Multi-axis Fast ED-milling, CIRP Annals - Manufacturing Technology, 72(1): 173-176.

[5] Gu, L., He, G., Li, K., Yang, Y., Zhao, W.*, 2022, Improving Surface Quality in BEAM with Optimized Electrode,

CIRP Annals - Manufacturing Technology, 71(1): 165-168.

[6] Gu, L., He, G.*, Zhao, W., Lahoti, G., 2020, High Performance Hybrid Machining of γ-TiAl with Blasting Erosion Arc

Machining and Grinding, CIRP Annals - Manufacturing Technology, 69(1): 161-164.

[7] Zhao, W., Gu, L.*, Zhang, F., Rajurkar, K.P., 2018, Modeling Study of the Hydrodynamic Arc Breaking Mechanism in

BEAM, Annals of the CIRP, 67(1):189-192.

[8] Gu, L., Zhang, F., Zhao, W.*, Rajurkar, K.P., Malshe, A.P., 2016, Investigation of Hydrodynamic Arc Breaking

Mechanism in Blasting Erosion Arc Machining, Annals of the CIRP, 65(1): 233-236.

[9] Zhao, W.*, Xu, H., Gu, L., Hong, H., Rajurkar, K.P., 2015, Influence of Polarity on the Performance of Blasting Erosion

Arc Machining, Annals of the CIRP, 64(1):213-216.

[10] Rajurkar, K.P., Wang, W.*, Zhao, W., 1997, WEDM-Adaptive Control with a Multiple Input Model for Indentification

of Workpiece Height, Annals of the CIRP, 46(1):147-150.

發表的部分論文：
[1] Zi-Lun Li, Hao-Yu Chu, Xue-Cheng Xi, Wei-Wen Xia, Yan-Xin Sun, Wan-Sheng Zhao. Improving reciprocating traveling WEDM performance by a new adaptive servo feedrate control system. The International Journal of Advanced Manufacturing Technology. Vol. 114, No.5, 1409-1425, 2021
[2] Jing Hu, Yulei Fu, Dong Li, Yingmou Zhu, Ruixue Zhang, Wansheng Zhao. Hybrid particle-thermodynamic model and experimental validation of multi-track periodical heating during electron beam treatment. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. Vol. 439, 34-42, 2018
[3] Weiwen Xia, Junqi Wang, Wansheng Zhao. Break-out Detection for High-speed Small Hole Drilling EDM Based on Machine Learning. Procedia CIRP 68, 569-574, 2018
[4] GW Huang, WW Xia, L Qin, WS Zhao. Online Workpiece Height Estimation for Reciprocated Traveling Wire EDM Based on Support Vector Machine. Procedia CIRP 68, 126-131 1, 2018
[5] YL Fu, J Hu, RX Zhang, WJ Huo, XT Cao, WS Zhao. Surface modification of AISI 1045 steel by pseudospark based pulsed electron beam. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. Vol. 434, 88-92, 2018
[6] L Gu, J Chen, Y Zhu, W Zhao, KP Rajurkar. Influence of reinforcement particles on the mechanism of the blasting erosion arc machining of SiC/Al composites. The International Journal of Advanced Manufacturing Technology, Vol. 99/5-8, 2018
[7] J Chen, L Gu, Y Zhu, W Zhao. High efficiency blasting erosion arc machining of 50 vol.% SiC/Al matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Journal of Engineering Manufacture. Vol.232/12, 2226-2235, 2018
[8] Y Zhang, N Han, X Kang, S Lan, W Zhao. Experimental investigation of the governing parameters of the electrostatic field–induced electrolyte jet micro electrical discharge machining on the silicon wafer. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol.232/12, 2201-2209, 2018
[9] W Zhao, L Gu, F Zhang, KP Rajurkar. Modeling study of the hydrodynamic arc breaking mechanism in BEAM. CIRP Annals, Vol. 67/1, 189-192, 2018
[10] X Kang, W Liang, W Zhao, H Xu. Feeding with perturbations in the EDM process of an integral shrouded blisk. The International Journal of Advanced Manufacturing Technology. Vol. 96/9-12, 3951-3957, 2018
[11] L Gu, Y Zhu, F Zhang, A Farhadi, W Zhao. Mechanism analysation and parameter optimization of electro discharge machining of titanium- zirconium- molybdenum alloy. Journal of Manufacturing Processes. Vol. 32, 773-781, 2018
[12] J Chen, L Gu, X Liu, W Zhao. Combined machining of SiC/Al composites based on blasting erosion arc machining and CNC milling. The International Journal of Advanced Manufacturing Technology. Vol. 96/1-4, 111-121, 2018
[13] HD Liu, XC Xi, W Liang, M Chen, H Chen, WS Zhao. A look-ahead transition algorithm for jump motions with short line segments in EDM. The International Journal of Advanced Manufacturing Technology. Vol. 95/1-4, 1409-1419, 2018
[14] Y Zhu, A Farhadi, G He, T Liang, L Gu, W Zhao. High-efficiency machining of large aspect-ratio rotational parts by rapid contour approaching WEDM. The International Journal of Advanced Manufacturing Technology. Vol. 94/9-12, 3577-3590, 2018
[15] HD Liu, XC Xi, M Chen, WS Zhao. A look-ahead transition algorithm and jump motion planning in multi-axis EDM for shrouded blisks. The International Journal of Advanced Manufacturing Technology, 1-12, 2018
[16] X Kang, W Liang, Y Yang, W Zhao. Maximum free distance method for electrode feeding path planning in EDM machining of integral shrouded blisks. Precision Engineering Vol. 51, 514-520, 2018
[17] Y Fu, J Hu, X Shen, Y Wang, W Zhao. Surface hardening of 30CrMnSiA steel using continuous electron beam. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. Vol. 410, 207-214, 2017
[18] Y Zhang, X Kang, W Zhao. The investigation of discharge restriction mechanism of the floating workpiece based electrostatic field-induced electrolyte jet (E-Jet) EDM. Journal of Materials Processing Technology. Vol. 247, 134-142, 2017
[19] H Xu, L Gu, W Zhao, J Chen, F Zhang. Influence of flushing holes on the machining performance of blasting erosion arc machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol. 231/11, 1949-1960, 2017
[20] Yaou Zhang, Ning Han, Xiaoming Kang, Wansheng Zhao, Kaixian Xu. Experimental study of an electrostatic field–induced electrolyte jet electrical discharge machining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol. 231/10,  1752-1759, 2017
[21] M Chen, XC Xi, WS Zhao, H Chen, HD Liu. A universal velocity limit curve generator considering abnormal tool path geometry for CNC machine tools. Journal of Manufacturing Systems. Vol. 44, 295-301, 2017
[22] Y Zhang, X Kang, W Zhao. The contrastive experimental investigation of the discharge concentration problem in the E-Jet EDM. The International Journal of Advanced Manufacturing Technology. Vol. 91/5-8, 2359-2367, 2017
[23] H Chen, XC Xi, WS Zhao, M Chen. Feedrate planning for synchronized movements involving rotary axes in multi-axis EDM for shrouded blisks. The International Journal of Advanced Manufacturing Technology. Vol. 90/9-12, 2645-2654, 2017
[24] Y Zhu, T Liang, L Gu, W Zhao. Precision machining of high aspect-ratio rotational part with wire electro discharge machining. Journal of Mechanical Science and Technology. Vol. 31/3, 1391-1399, 2017
[25] H Chen, WS Zhao, XC Xi, M Chen, W Liang. Non-circular parametric curve and curved surface interpolation and tool compensation for WEDM based on unit arc length increment method. The International Journal of Advanced Manufacturing Technology. Vol. 88/5-8, 1257-1266, 2017
[26] XC Xi, M Chen, WS Zhao. Improving electrical discharging machining efficiency by using a Kalman filter for estimating gap voltages. Precision Engineering. Vol. 47, 182-190, 2017
[27] L Gu, J Chen, H Xu, W Zhao. Blasting erosion arc machining of 20 vol.% SiC/Al metal matrix composites. The International Journal of Advanced Manufacturing Technology. Vol. 87/9-12, 2775-2784, 2016
[28] Y Zhang, K Wilt, X Kang, N Han, W Zhao. The experimental investigation of electrostatic field-induced electrolyte jet (E-Jet) micro-electrical machining mechanism. The International Journal of Advanced Manufacturing Technology. Vol. 87/9-12, 3059-3068, 2016
[29] W Liang, X Kang, W Zhao, Y Yang. Electrical discharge machining of electron beam melting formed shrouded blisk. The International Journal of Advanced Manufacturing Technology. Vol. 87/5-8, 2319-2326, 2016
[30] F Zhang, L Gu, J Chen, H Xu, W Zhao. Observation and modeling research of high-velocity flushing effect on the performance of BEAM. The International Journal of Advanced Manufacturing Technology. Vol. 86/1-4, 935-942, 2016
[31] J Chen, L Gu, H Xu, W Zhao. Study on blasting erosion arc machining of Ti–6Al–4V alloy. The International Journal of Advanced Manufacturing Technology. Vol.  85/9-12, 2819-2829, 2016
[32] Y Zhang, N Han, X Kang, W Zhao. An experimental study on the effect of parameters on the depth of crater machined by electrostatic field–induced electrolyte jet micro electrical discharge machining. Advances in Mechanical Engineering. Vol. 8/4, 1-7, 2016
[33] L Gu, F Zhang, W Zhao, KP Rajurkar, AP Malshe. Investigation of hydrodynamic arc breaking mechanism in blasting erosion arc machining. CIRP Annals. Vol. 65 /1, 233-236, 2016
[34] Wansheng Zhao, Junmin Zheng, Xuecheng Xi, Mo Chen, Hao Chen, Weiwen Xia. A new model of WEDM-CNC system with digitizer/player architecture. Procedia CIRP. Vol. 42, 210-214, 2016
[35] Fawang Zhang, Lin Gu, Jing Hu, Wansheng Zhao. A new thermal model considering TIE of the expanding spark for anode erosion process of EDM in water[J]. The International Journal of Advanced Manufacturing Technology. Vol. 82/1-2, 573-582, 2016.
[36] Wansheng Zhao, Hui Xu, Lin Gu, Hong Han, K.P. Rajurkar. Influence of polarity on the performance of Blasting Erosion Arc Machining[J]. CIRP Annals-Manufacturing Technology, Vol. 64/1, 213-216, 2015.
[37] Hui Xu, Lin Gu, Jipeng Chen, Jing Hu, Wansheng Zhao. Machining characteristics of nickel-based alloy with positive polarity blasting erosion arc machining[J]. The International Journal of Advanced Manufacturing Technology. Vol. 79/5–8, 937–947, 2015.
[38] Xuecheng Xi, Wansheng Zhao, Aun-Neow Poo. Improving CNC contouring accuracy by robust digital integral sliding mode control[J]. International Journal of Machine Tools and Manufacture, 2015, 88: 51-61.
[39] Chen M, Wansheng Zhao, Xi Xuecheng. Augmented Taylor's expansion method for B-spline curve interpolation for CNC machine tools[J]. International Journal of Machine Tools and Manufacture, 2015, 94: 109-119.
[40] Xuecheng Xi, Shangcheng Dou, Wansheng Zhao . Online estimation of workpiece height by least squares support vector machines in wire electrical discharge machining[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014, 228(14): 2618-2631.
[41] Xiaoming Kang, Lei Dong, Wansheng Zhao. Performance of propellant for ultrasonically aided electric propulsion[J]. Acta Astronautica, 2014, 98: 1-8.
[42] Shangcheng Dou, Xuecheng Xi, Wansheng Zhao. Workpiece height estimation in wire electrical discharge machining by using support vector regression[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013, 227(4): 565-577.
[43] Xiao Liu, Xiaoming Kang, Xuecheng Xi, Wei Liang, Wansheng Zhao. Electrode feed path planning for multi-axis EDM of integral shrouded impeller[J]. The International Journal of Advanced Manufacturing Technology, 2013, 68(5-8): 1697-1706.
[44] Wansheng Zhao, Lin Gu, Hui Xu, Lei Li, Xiaoli Xiang . A novel high efficiency electrical erosion process–blasting erosion arc machining[J]. Procedia CIRP, 2013, 6: 621-625.
[45] Yaou Zhang, Wansheng Zhao, Tiansheng Lu, Jingsong Li. The Attitude Control of the Four–Rotor Unmanned Helicopter Based on Feedback Linearization Control[J]. WSEAS Transactions on Systems (4).2013.Volume 12.Issue 4
[46] Su Liang, Wansheng Zhao, Xuecheng Xi. Design of a real-time NURBS interpolator with constant segment length for milling EDM[J]. The International Journal of Advanced Manufacturing Technology, 2013, 67(1-4): 427-440.
[47] Ye Yang, Wansheng Zhao. Investigation of the nanoscale features fabricated on the HOPG surface induced by STM electric lithography under different voltage regions in ambient conditions[J]. Precision Engineering, 2013, 37(2): 473-482.
[48] Yi Jiang, Wansheng Zhao, Xuecheng Xi, Lin Gu, Xiaoming Kang. Detecting discharge status of small-hole EDM based on wavelet transform[J]. The International Journal of Advanced Manufacturing Technology, 2012, 61(1-4): 171-183.
[49] Ye Yang, Wansheng Zhao. Nanopit generation on HOPG surface induced by CAFM electric lithography[J]. International Journal of Nanomanufacturing, 2012, 8(4): 263-277.
[50] Yi Jiang, Wansheng Zhao, Xuecheng Xi, Lin Gu. Adaptive control for small-hole EDM process with wavelet transform detecting method[J]. Journal of mechanical science and technology, 2012, 26(6): 1885-1890.
[51] Lei Li, Lin Gu, Xuecheng Xi, Wansheng Zhao. Influence of flushing on performance of EDM with bunched electrode[J]. The International Journal of Advanced Manufacturing Technology, 2012, 58(1-4): 187-194.
[52] Lin Gu, Lei Li, Wansheng Zhao, K.P. Rajurkarb. Electrical discharge machining of Ti6Al4V with a bundled electrode[J]. International Journal of Machine Tools and Manufacture, 2012, 53(1): 100-106.
[53] Yi Jiang, Wansheng Zhao, Xuecheng Xi. A study on pulse control for small-hole electrical discharge machining[J]. Journal of Materials Processing Technology, 2012, 212(7): 1463-1471.
[54] Yi Jiang, Wansheng Zhao, Xuecheng Xi, Xiaoming Kang, Lin Gu. Vibration assisted EDM of small-hole using voice coil motor[J]. Procedia CIRP, 2012, 1: 645-650.
[55] Lin Gu, Lei Li, Wansheng Zhao, Kamlakar P. Rjaurkar. An Efficient and Economical Rapid-Tooling Method for Die-Sinking Electrical Discharge Machining[J]. Journal of Manufacturing Science and Engineering, 2011, 133(5): 051004.
[56] Yong Wu, Xiaoming Kang, Xiao Liu, Wansheng Zhao. Electrode Designing System for EDMing Shrouded Turbine Blisk Based on UG Secondary Development[J]. Aerospace Materials & Technology, 2011, 3: 020.
[57] Yi Jiang, Wansheng Zhao, Lin Gu , Xiaoming Kang. Research on Pulse Generator and Pulse Control Technology for Micro Electrical Discharge Machining [J][J]. Journal of Shanghai Jiaotong University, 2011, 11: 022.
[58] Yi Jiang, Wansheng Zhao, Xuecheng Xi, Lin Gu, Xiaoming Kang. Detecting discharge status of small-hole EDM based on wavelet transform. The International Journal of Advanced Manufacturing Technology. 2011, DOI: 10.1007/s00170-011- 3676-9.:1-13.
[59] Ye Yang, Natsu Wataru, Wansheng Zhao. Realization of eco-friendly electrochemical micromachining using mineral water as an electrolyte[J]. Precision Engineering, 2011, 35(2): 204-213.
[60] Dan Wang, Wansheng Zhao , Xiaoming Kang, Lin Gu, Honyu Wei. Orthogonal-Testing Experimental on Micro-Ultrasonic-Machining of Microcrystalline-Mica-Ceramic [J][J]. Journal of Shanghai Jiaotong University, 2010, 1: 011.
[61] Wang Dan, Zhao Wansheng, Gu Lin, Kang Xiaoming. A study on micro-hole machiningof polycrystalline diamond by micro electrical discharge machining. Journal of Materials Processing Technology.2011, 211(1): 3-11.
[62] Xiaoming Kang, Tiezhu Xin, Feng Jin, Lei Dong, Wansheng Zhao. Application of MAO-processed ceramic layerin micro thrusters. Aircraft Engineering and Aerospace Technology, 2011, 83(1):21-25
[63] Lei Li, Lin Gu, Xuecheng Xi, Wansheng Zhao. Influence of Flushing on Performance of EDM with Bunched Electrode. International Journal of Advanced Manufacturing Technology, 2011, DOI: 10.1007/s00170-011-3357-8
[64] Yaou Zhang, Wansheng Zhao, Xiaoming Kang. Control of the permanent magnet synchronous motor using model reference dynamic inversion[J]. WSEAS transaction on systems and control, 2010, 5.
[65] Yaou Zhang, Wansheng Zhao, Hongyu Wei. The study of recursive-based sliding mode adaptive control of the permanent magnet synchronous motor[J]. WSEAS Transactions on Systems, 2010, 9(5): 559-569.
[66] Duan Junyi, Kang Xiaoming and Zhao Wansheng. Minimum emission current of indium-field emission electric propulsion thruster. Aircraft Engineering and Aerospace Technology. 2010, 82(5) : 284-287

1. 專利名稱：集束電極高速放電加工方法   授權號：ZL201110030724.7
2. 專利名稱：可內沖液式電火花加工集束成型電極  授權號：CN1657208
3. 專利名稱：集束成形電極夾持裝置   授權號：CN101890547
4. 專利名稱：集束成形電極的數字化制備裝置及其制備方法  授權號： CN101966614B
5. 專利名稱：水平走絲的分體式微細電火花線切割裝置 授權號：ZL200610028638.1
6. 專利名稱：基于刃口電極微細電解磨削的微細電極在線制造方法 授權號： ZL200610027966.X  
7. 專利名稱：蠕動式微細電火花加工裝置 授權號： ZL200510025944.5
8. 專利名稱：蠕動式微細電火花加工裝置 授權號： ZL200510025944.5
9. 軟件名稱：微細電火花加工數控系統 登記號： 2006SR11595
10. 軟件名稱：基于Linux的桌面式微細電加工機床數控系統軟件 登記號：2009SR017567